Manpages - sudo_logsrvd.8

is a high-performance log server that accepts event and I/O logs from

It can be used to implement centralized logging of

logs. The server has two modes of operation: local and relay. By default,

stores the logs locally but it can also be configured to relay them to another server that supports the

protocol.

When not relaying, event log entries may be logged either via

or to a local file. I/O Logs stored locally by

can be replayed via the

utility in the same way as logs generated directly by the

plugin.

The server also supports restarting interrupted log transfers. To distinguish completed I/O logs from incomplete ones, the I/O log timing file is set to be read-only when the log is complete.

Configuration parameters for

may be specified in the

file or the file specified via the

option.

rereads its configuration file when it receives SIGHUP and writes server state to the debug file (if one is configured) when it receives SIGUSR1.

The options are as follows:

Read configuration from

instead of the default,

Display a short help message to the standard output and exit.

Run

in the foreground instead of detaching from the terminal and becoming a daemon.

For each message, there is a

chance that the server will drop the connection. This is only intended for debugging the ability of a client to restart a connection.

Print the

version and exit.

The I/O log data sent to

may contain sensitive information such as passwords and should be secured using Transport Layer Security (TLS). Doing so requires having a signed certificate on the server and, if

is enabled in

a signed certificate on the client as well.

The certificates can either be signed by a well-known Certificate Authority (CA), or a private CA can be used. Instructions for creating a private CA are included below in the

section.

supports a flexible debugging framework that is configured via

lines in the

file.

For more information on configuring

please refer to its manual.

Sudo front end configuration

Sudo log server configuration file

Directory where new journals are stored when the

setting is enabled.

Directory where completed journals are stored when the

setting is enabled.

Default I/O log file location

Process ID file for

Unless you are using certificates signed by a well-known Certificate Authority (or a local enterprise CA), you will need to create your own CA that can sign the certificates used by

and the

plugin. The following steps use the

command to create keys and certificates.

First, we need to create a directory structure to store the files for the CA. We’ll create a new directory hierarchy in

for this purpose.

private # chmod 700 private # touch index.txt # echo 1000 > serial

The serial and index.txt files are used to keep track of signed certificates.

Next, we need to make a copy of the openssl.conf file and customize it for our new CA. The path to openssl.cnf is system-dependent but

is the most common location. You will need to adjust the example below if it has a different location on your system.

Now edit the

file in the current directory and make sure it contains

and

sections. Those sections should include the following settings:

[ ca ] default_ca = CA_default

[ CA_default ] dir = /etc/ssl/sudo certs = $dir/certs database = $dir/index.txt certificate = $dir/cacert.pem serial = $dir/serial

If your

file already has a

section, you may only need to modify the

setting.

In order to create and sign our own certificates, we need to create a private key and a certificate for the root of the CA. First, create the private key and protect it with a pass phrase:

private/cakey.pem

Next, generate the root certificate, using appropriate values for the site-specific fields:

-days 7300 -sha256 -extensions v3_ca \ -out cacert.pem

Enter pass phrase for private/cakey.pem: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank. For some fields there will be a default value, If you enter ’.’, the field will be left blank. –— Country Name (2 letter code) [AU]:US State or Province Name (full name) [Some-State]:Colorado Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]:sudo Organizational Unit Name (eg, section) []:sudo Certificate Authority Common Name (e.g., server FQDN or YOUR name) []:sudo Root CA Email Address []:

Finally, verify the root certificate:

The server and client certificates will be signed by the previously created root CA. Usually, the root CA is not used to sign server/client certificates directly. Instead, intermediate certificates are created and signed with the root CA and the intermediate certs are used to sign CSRs (Certificate Signing Request). In this example we’ll skip this part for simplicity’s sake and sign the CSRs with the root CA.

First, generate the private key without a pass phrase.

private/logsrvd_key.pem

Next, create a certificate signing request (CSR) for the server’s certificate. The organization name must match the name given in the root certificate. The common name should be either the server’s IP address or a fully qualified domain name.

-sha256 -out csr/logsrvd_csr.pem

Enter pass phrase for private/logsrvd_key.pem: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank. For some fields there will be a default value, If you enter ’.’, the field will be left blank. –— Country Name (2 letter code) [AU]:US State or Province Name (full name) [Some-State]:Colorado Locality Name (eg, city) []: Organization Name (eg, company) [Internet Widgits Pty Ltd]:sudo Organizational Unit Name (eg, section) []:sudo log server Common Name (e.g., server FQDN or YOUR name) []:logserver.example.com Email Address []:

Please enter the following ’extra’ attributes to be sent with your certificate request A challenge password []: An optional company name []:

Now sign the CSR that was just created:

csr/logsrvd_csr.pem -out certs/logsrvd_cert.pem

Using configuration from openssl.cnf Enter pass phrase for ./private/cakey.pem: Check that the request matches the signature Signature ok Certificate Details: Serial Number: 4096 (0x1000) Validity Not Before: Nov 11 14:05:05 2019 GMT Not After : Nov 20 14:05:05 2020 GMT Subject: countryName = US stateOrProvinceName = Colorado organizationName = sudo organizationalUnitName = sudo log server commonName = logserve.example.com X509v3 extensions: X509v3 Basic Constraints: CA:FALSE Netscape Comment: OpenSSL Generated Certificate X509v3 Subject Key Identifier: 4C:50:F9:D0:BE:1A:4C:B2:AC:90:76:56:C7:9E:16:AE:E6:9E:E5:B5 X509v3 Authority Key Identifier: keyid:D7:91:24:16:B1:03:06:65:1A:7A:6E:CF:51:E9:5C:CB:7A:95:3E:0C

Certificate is to be certified until Nov 20 14:05:05 2020 GMT (375 days) Sign the certificate? [y/n]:y

1 out of 1 certificate requests certified, commit? [y/n]y Write out database with 1 new entries Data Base Updated

Finally, verify the new certificate:

certs/logsrvd_cert.pem: OK

The

directory now contains a signed and verified certificate for use with

To generate a client certificate, repeat the process above using a different file name.

To use TLS for client/server communication, both

and the

plugin need to be configured to use TLS. Configuring

for TLS requires the following settings, assuming the same path names used earlier:

listen_address = *:30344(tls)

tls_cacert = /etc/ssl/sudo/cacert.pem

/etc/ssl/sudo/certs/logsrvd_cert.pem

/etc/ssl/sudo/private/logsrvd_key.pem

The root CA cert

must be installed on the system running

If peer authentication is enabled on the client, a copy of

must be present on the client system too.

Many people have worked on

over the years; this version consists of code written primarily by:

See the CONTRIBUTORS file in the

distribution (https://www.sudo.ws/contributors.html) for an exhaustive list of people who have contributed to

If you feel you have found a bug in

please submit a bug report at https://bugzilla.sudo.ws/

Limited free support is available via the sudo-users mailing list, see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.

is provided

and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. See the LICENSE file distributed with

or https://www.sudo.ws/license.html for complete details.

Author: dt

Created: 2022-02-20 Sun 09:47