Manpages - partclone.imager.8

partclone.imager - unsupported file system backup utility.(like `dd` )

partclone.imager {[*-c* | –clone*] [-r* | –restore*] [-b* | –dev-to-dev*]} {{-s* | –source} source} {{-o | –output} [*-O* | –overwrite*] target} [-dX* | –debug=X*] [–restore_raw_file*] [*-z* | –buffer_size*] [-N* | –ncurses*] [-q* | –quiet*] [-f* | –UI-fresh*] [-F* | –force*] [-I* | –ignore_fschk*] [–ignore_crc*] [*-X* | –dialog*] [-C* | –nocheck*] [-R* | –rescue*] [{-L* | –logfile} /logfile/]

partclone.imager is a part of Partclone project to clone unsupported file system with dd method. It will backup all block from partition. Partclone provide utilities to backup used blocks and design for higher compatibility of the file system by using existing library, e.g. e2fslibs is used to read the used block of ext2 partition.

Partclone supported file system include btrfs, ext2, ext3, ext4, reiserfs, reiser4, xfs and jfs for LINUX. Also support some non-linux operation system, ex: NTFS and FAT (for Windows), HFS plus(APPLE MAC OS), UFS2(FreeBSD), VMFS(VMWare Vsphere). All partclone utils could be run like partclone.xxx is very smiliar fsck or mkfs. For example, for backup/restore hfsplus, just run partclone.hfsp.

The program follows the usual GNU command line syntax, with long options starting with two dashes (`-). A summary of options is included below.

*-s */FILE/, *–source */FILE/

Source FILE. The FILE could be a image file(made by partclone) or device depend on your action. Normanly, backup source is device, restore source is image file.

Receving data from pipe line is supported ONLY for restoring, just ignore -s option or use - means receive data from stdin.

*-o */FILE/, *–output */FILE/

Output FILE. The FILE could be a image file(partclone will generate) or device depend on your action. Normanly, backup output to image file and restore output to device.

Sending data to pipe line is also supported ONLY for back-up, just ignore -o option or use - means send data to stdout.

*-O */FILE/, *–overwrite */FILE/

Overwrite FILE, overwriting if exists.

-c, –clone

Save partition to the special image format.

-r, –restore

Restore partition from the special image format.

-b, –dev-to-dev

Local device to device copy on-the-fly, source and output both are device.

–restore_raw_file

Creating special raw file for loop device.

*-L */FILE/, *–logfile */FILE/

put special path to record partclone log information.(default /var/log/partclone.log)

-R, –rescue

Continue after disk read errors.

-C, –no_check

Dont check device size and free space.

-N, –ncurse

Using Ncurses Text User Interface.

-X, –dialog

Output message as Dialog Format.

-I, –ignore_fschk

Ignore filesystem check.

–ignore_crc

Ignore crc check error.

-F, –force

Force progress.

*-f */sec/, *–UI-fresh */sec/

put special second to different interval.

*-z */size/, *–buffer_size */size/

Read/write buffer size (default: 1048576)

-q, –quiet

Disable progress message.

*-d*/level/, *–debug */level/

Set the debug level [1|2|3]

-h, –help

Show summary of options.

-v, –version

Show version of program.

/var/log/partclone.log

The log file of partclone.imager

     clone /dev/hda1 to hda1.dd.img and display debug information.
       partclone.dd -c -d -s /dev/hda1 -o hda1.dd.img

     restore /dev/hda1 from hda1.dd.img and display debug information.
       partclone.dd -r -d -s hda1.dd.img -o /dev/hda1
        

The following diagnostics may be issued on stderr:

partclone.imager provides some return codes, that can be used in scripts:

Code	Diagnostic
0	Program exited successfully.
1	Clone or Restore seem failed.

Report bugs to thomas@nchc.org.tw or http://partclone.org.

You can get support at http://partclone.org

*partclone*(8), *partclone.chkimg*(8), *partclone.restore*(8), *partclone.dd*(8), *partclone.info*(8)

Yu-Chin Tsai <thomas@nchc.org.tw>

nil

Copyright © 2007 Yu-Chin Tsai

This manual page was written for the Debian system (and may be used by others).

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public License, Version 2 or (at your option) any later version published by the Free Software Foundation.

On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.