Manpages - sane-ricoh.5

sane-ricoh - SANE backend for Ricoh flatbed scanners

The sane-ricoh library implements a SANE (Scanner Access Now Easy) backend that provides access to the following Ricoh flatbed scanners:

IS50
IS60

This backend expects device names of the form:

special

Where special is the path-name for the special device that corresponds to a SCSI scanner. The special device name must be a generic SCSI device or a symlink to such a device. The program *sane-find-scanner*(1) helps to find out the correct device. Under Linux, such a device name could be /dev/sga or /dev/sge, for example. See *sane-scsi*(5) for details.

/etc/sane.d/ricoh.conf

The backend configuration file (see also description of SANE_CONFIG_DIR below).

/usr/lib/sane/libsane-ricoh.a

The static library implementing this backend.

/usr/lib/sane/libsane-ricoh.so

The shared library implementing this backend (present on systems that support dynamic loading).

SANE_CONFIG_DIR

This environment variable specifies the list of directories that may contain the configuration file. Under UNIX, the directories are separated by a colon (`:’), under OS/2, they are separated by a semi-colon (`;’). If this variable is not set, the configuration file is searched in two default directories: first, the current working directory (“.”) and then in /etc/sane.d. If the value of the environment variable ends with the directory separator character, then the default directories are searched after the explicitly specified directories. For example, setting SANE_CONFIG_DIR to “tmp/config:“ would result in directories /tmp/config, ., and /etc/sane.d being searched (in this order).

SANE_DEBUG_RICOH

If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher debug levels increase the verbosity of the output.

Example: export SANE_DEBUG_RICOH=4

*sane*(7), *sane-scsi*(5), *sane-find-scanner*(1)

Feico W. Dillema