Manpages - popen.3p

Table of Contents

PROLOG

This manual page is part of the POSIX Programmer’s Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.

NAME

popen — initiate pipe streams to or from a process

SYNOPSIS

  #include <stdio.h>
  FILE *popen(const char *command, const char *mode);

DESCRIPTION

The popen/() function shall execute the command specified by the string /command. It shall create a pipe between the calling program and the executed command, and shall return a pointer to a stream that can be used to either read from or write to the pipe.

The environment of the executed command shall be as if a child process were created within the popen/() call using the /fork/() function, and the child invoked the /sh utility using the call:


    execl(shell path, "sh", "-c", command, (char *)0);

where shell path is an unspecified pathname for the sh utility.

The /popen/() function shall ensure that any streams from previous /popen/() calls that remain open in the parent process are closed in the new child process.

The mode argument to /popen/() is a string that specifies I/O mode:

1.
If mode is r, when the child process is started, its file descriptor STDOUT_FILENO shall be the writable end of the pipe, and the file descriptor fileno/(/stream) in the calling process, where stream is the stream pointer returned by /popen/(), shall be the readable end of the pipe.
2.
If mode is w, when the child process is started its file descriptor STDIN_FILENO shall be the readable end of the pipe, and the file descriptor fileno/(/stream) in the calling process, where stream is the stream pointer returned by /popen/(), shall be the writable end of the pipe.
3.
If mode is any other value, the result is unspecified.

After /popen/(), both the parent and the child process shall be capable of executing independently before either terminates.

Pipe streams are byte-oriented.

RETURN VALUE

Upon successful completion, /popen/() shall return a pointer to an open stream that can be used to read or write to the pipe. Otherwise, it shall return a null pointer and may set errno to indicate the error.

ERRORS

The /popen/() function shall fail if:

EMFILE
{STREAM_MAX} streams are currently open in the calling process.

The /popen/() function may fail if:

EMFILE
{FOPEN_MAX} streams are currently open in the calling process.
EINVAL
The mode argument is invalid.

The popen/() function may also set /errno values as described by /fork ( )/ or /pipe ( )/.

The following sections are informative.

EXAMPLES

Using popen( ) to Obtain a List of Files from the ls Utility

The following example demonstrates the use of /popen/() and /pclose/() to execute the command /ls/* in order to obtain a list of files in the current directory:


    #include <stdio.h>
    ...
    FILE *fp;
    int status;
    char path[PATH_MAX];
    fp = popen("ls *", "r");
    if (fp == NULL)
        /* Handle error */;
    while (fgets(path, PATH_MAX, fp) != NULL)
        printf("%s", path);
    status = pclose(fp);
    if (status == -1) {
        /* Error reported by pclose() */
        ...
    } else {
        /* Use macros described under wait() to inspect `status' in order
           to determine success/failure of command executed by popen() */
        ...
    }

APPLICATION USAGE

Since open files are shared, a mode r command can be used as an input filter and a mode w command as an output filter.

Buffered reading before opening an input filter may leave the standard input of that filter mispositioned. Similar problems with an output filter may be prevented by careful buffer flushing; for example, with /fflush ( )/.

A stream opened by /popen/() should be closed by /pclose/().

The behavior of popen/() is specified for values of /mode of r and w. Other modes such as rb and wb might be supported by specific implementations, but these would not be portable features. Note that historical implementations of popen/() only check to see if the first character of /mode is r. Thus, a mode of robert the robot would be treated as mode r, and a mode of anything else would be treated as mode w.

If the application calls waitpid/() or /waitid/() with a /pid argument greater than 0, and it still has a stream that was called with popen/() open, it must ensure that /pid does not refer to the process started by /popen/().

To determine whether or not the environment specified in the Shell and Utilities volume of POSIX.1‐2017 is present, use the function call:


    sysconf(_SC_2_VERSION)

(See /sysconf ( )/).

RATIONALE

The popen/() function should not be used by programs that have set user (or group) ID privileges. The /fork/() and /exec family of functions (except /execlp/() and /execvp/()), should be used instead. This prevents any unforeseen manipulation of the environment of the user that could cause execution of commands not anticipated by the calling program.

If the original and /popen/()ed processes both intend to read or write or read and write a common file, and either will be using FILE-type C functions ( fread/(), /fwrite/(), and so on), the rules for sharing file handles must be observed (see /Section 2.5.1, Interaction of File Descriptors and Standard I/O Streams).

FUTURE DIRECTIONS

None.

SEE ALSO

Section 2.5, Standard I/O Streams, /fork ( )/, /pclose ( )/, /pipe ( )/, /sysconf ( )/, /system ( )/, /wait ( )/, /waitid ( )/

The Base Definitions volume of POSIX.1‐2017, <stdio.h>

The Shell and Utilities volume of POSIX.1‐2017, /sh /

COPYRIGHT

Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard for Information Technology – Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html .

Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .

Author: dt

Created: 2022-02-20 Sun 09:13