Manpages - feature.3perl

Table of Contents



NAME

feature - Perl pragma to enable new features

SYNOPSIS

use feature qw(fc say); # Without the “use feature” above, this code would not be able to find # the built-ins “say” or “fc”: say “The case-folded version of $x is: ” . fc $x; # set features to match the :5.10 bundle, which may turn off or on # multiple features (see below) use feature :5.10; # implicitly loads :5.10 feature bundle use v5.10;

DESCRIPTION

It is usually impossible to add new syntax to Perl without breaking some existing programs. This pragma provides a way to minimize that risk. New syntactic constructs, or new semantic meanings to older constructs, can be enabled by use feature foo, and will be parsed only when the appropriate feature pragma is in scope. (Nevertheless, the CORE:: prefix provides access to all Perl keywords, regardless of this pragma.)

Lexical effect

Like other pragmas (use strict, for example), features have a lexical effect. use feature qw(foo) will only make the feature foo available from that point to the end of the enclosing block.

{ use feature say; say “say is available here”; } print “But not here.\n”;

“no feature”

Features can also be turned off by using no feature "foo". This too has lexical effect.

use feature say; say “say is available here”; { no feature say; print “But not here.\n”; } say “Yet it is here.”;

no feature with no features specified will reset to the default group. To disable all features (an unusual request!) use no feature :all.

AVAILABLE FEATURES

The ’say’ feature

use feature say tells the compiler to enable the Raku-inspired say function.

See say in perlfunc for details.

This feature is available starting with Perl 5.10.

The ’state’ feature

use feature state tells the compiler to enable state variables.

See Persistent Private Variables in perlsub for details.

This feature is available starting with Perl 5.10.

The ’switch’ feature

WARNING: This feature is still experimental and the implementation may change or be removed in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:

no warnings “experimental::smartmatch”;

use feature switch tells the compiler to enable the Raku given/when construct.

See Switch Statements in perlsyn for details.

This feature is available starting with Perl 5.10.

The ’unicode_strings’ feature

use feature unicode_strings tells the compiler to use Unicode rules in all string operations executed within its scope (unless they are also within the scope of either use locale or use bytes). The same applies to all regular expressions compiled within the scope, even if executed outside it. It does not change the internal representation of strings, but only how they are interpreted.

no feature unicode_strings tells the compiler to use the traditional Perl rules wherein the native character set rules is used unless it is clear to Perl that Unicode is desired. This can lead to some surprises when the behavior suddenly changes. (See The Unicode Bug“” in perlunicode for details.) For this reason, if you are potentially using Unicode in your program, the use feature unicode_strings subpragma is strongly recommended.

This feature is available starting with Perl 5.12; was almost fully implemented in Perl 5.14; and extended in Perl 5.16 to cover quotemeta; was extended further in Perl 5.26 to cover the range operator; and was extended again in Perl 5.28 to cover special-cased whitespace splitting.

The ’unicode_eval’ and ’evalbytes’ features

Together, these two features are intended to replace the legacy string eval function, which behaves problematically in some instances. They are available starting with Perl 5.16, and are enabled by default by a use 5.16 or higher declaration.

unicode_eval changes the behavior of plain string eval to work more consistently, especially in the Unicode world. Certain (mis)behaviors couldn’t be changed without breaking some things that had come to rely on them, so the feature can be enabled and disabled. Details are at Under the unicode_eval feature in perlfunc.

evalbytes is like string eval, but operating on a byte stream that is not UTF-8 encoded. Details are at evalbytes EXPR in perlfunc. Without a use feature evalbytes nor a use v5.16 (or higher) declaration in the current scope, you can still access it by instead writing CORE::evalbytes.

The ’current_sub’ feature

This provides the _ _SUB_ _ token that returns a reference to the current subroutine or undef outside of a subroutine.

This feature is available starting with Perl 5.16.

The ’array_base’ feature

This feature supported the legacy $[ variable. See $[ in perlvar. It was on by default but disabled under use v5.16 (see IMPLICIT LOADING, below) and unavailable since perl 5.30.

This feature is available under this name starting with Perl 5.16. In previous versions, it was simply on all the time, and this pragma knew nothing about it.

The ’fc’ feature

use feature fc tells the compiler to enable the fc function, which implements Unicode casefolding.

See fc in perlfunc for details.

This feature is available from Perl 5.16 onwards.

The ’lexical_subs’ feature

In Perl versions prior to 5.26, this feature enabled declaration of subroutines via my sub foo, state sub foo and our sub foo syntax. See Lexical Subroutines in perlsub for details.

This feature is available from Perl 5.18 onwards. From Perl 5.18 to 5.24, it was classed as experimental, and Perl emitted a warning for its usage, except when explicitly disabled:

no warnings “experimental::lexical_subs”;

As of Perl 5.26, use of this feature no longer triggers a warning, though the experimental::lexical_subs warning category still exists (for compatibility with code that disables it). In addition, this syntax is not only no longer experimental, but it is enabled for all Perl code, regardless of what feature declarations are in scope.

The ’postderef’ and ’postderef_qq’ features

The ’postderef_qq’ feature extends the applicability of postfix dereference syntax so that postfix array and scalar dereference are available in double-quotish interpolations. For example, it makes the following two statements equivalent:

my $s = “[@{ $h->{a} }]”; my $s = “[$h->{a}->@*]”;

This feature is available from Perl 5.20 onwards. In Perl 5.20 and 5.22, it was classed as experimental, and Perl emitted a warning for its usage, except when explicitly disabled:

no warnings “experimental::postderef”;

As of Perl 5.24, use of this feature no longer triggers a warning, though the experimental::postderef warning category still exists (for compatibility with code that disables it).

The ’postderef’ feature was used in Perl 5.20 and Perl 5.22 to enable postfix dereference syntax outside double-quotish interpolations. In those versions, using it triggered the experimental::postderef warning in the same way as the ’postderef_qq’ feature did. As of Perl 5.24, this syntax is not only no longer experimental, but it is enabled for all Perl code, regardless of what feature declarations are in scope.

The ’signatures’ feature

WARNING: This feature is still experimental and the implementation may change or be removed in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:

no warnings “experimental::signatures”;

This enables unpacking of subroutine arguments into lexical variables by syntax such as

sub foo ($left, $right) { return $left + $right; }

See Signatures in perlsub for details.

This feature is available from Perl 5.20 onwards.

The ’refaliasing’ feature

WARNING: This feature is still experimental and the implementation may change or be removed in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:

no warnings “experimental::refaliasing”;

This enables aliasing via assignment to references:

\$a = \$b; # $a and $b now point to the same scalar \@a = \@b; # to the same array \%a = \%b; \&a = \&b; foreach \%hash (@array_of_hash_refs) { … }

See Assigning to References in perlref for details.

This feature is available from Perl 5.22 onwards.

The ’bitwise’ feature

This makes the four standard bitwise operators (& | ^ ~) treat their operands consistently as numbers, and introduces four new dotted operators (&. |. ^. ~.) that treat their operands consistently as strings. The same applies to the assignment variants (& |= ^= &.= |.= ^.==).

See Bitwise String Operators in perlop for details.

This feature is available from Perl 5.22 onwards. Starting in Perl 5.28, use v5.28 will enable the feature. Before 5.28, it was still experimental and would emit a warning in the experimental::bitwise category.

The ’declared_refs’ feature

WARNING: This feature is still experimental and the implementation may change or be removed in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:

no warnings “experimental::declared_refs”;

This allows a reference to a variable to be declared with my, state, our our, or localized with local. It is intended mainly for use in conjunction with the refaliasing feature. See Declaring a Reference to a Variable in perlref for examples.

This feature is available from Perl 5.26 onwards.

The ’isa’ feature

WARNING: This feature is still experimental and the implementation may change or be removed in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:

no warnings “experimental::isa”;

This allows the use of the isa infix operator, which tests whether the scalar given by the left operand is an object of the class given by the right operand. See Class Instance Operator in perlop for more details.

This feature is available from Perl 5.32 onwards.

The ’indirect’ feature

This feature allows the use of indirect object syntax for method calls, e.g. new Foo 1, 2;. It is enabled by default, but can be turned off to disallow indirect object syntax.

This feature is available under this name from Perl 5.32 onwards. In previous versions, it was simply on all the time. To disallow (or warn on) indirect object syntax on older Perls, see the indirect CPAN module.

The ’multidimensional’ feature

This feature enables multidimensional array emulation, a perl 4 (or earlier) feature that was used to emulate multidimensional arrays with hashes. This works by converting code like $foo{$x, $y} into $foo{join($;, $x, $y)}. It is enabled by default, but can be turned off to disable multidimensional array emulation.

When this feature is disabled the syntax that is normally replaced will report a compilation error.

This feature is available under this name from Perl 5.34 onwards. In previous versions, it was simply on all the time.

You can use the multidimensional module on CPAN to disable multidimensional array emulation for older versions of Perl.

The ’bareword_filehandles’ feature.

This feature enables bareword filehandles for builtin functions operations, a generally discouraged practice. It is enabled by default, but can be turned off to disable bareword filehandles, except for the exceptions listed below.

The perl built-in filehandles STDIN, STDOUT, STDERR, DATA, ARGV, ARGVOUT and the special _ are always enabled.

This feature is enabled under this name from Perl 5.34 onwards. In previous versions it was simply on all the time.

You can use the bareword::filehandles module on CPAN to disable bareword filehandles for older versions of perl.

The ’try’ feature.

WARNING: This feature is still experimental and the implementation may change or be removed in future versions of Perl. For this reason, Perl will warn when you use the feature, unless you have explicitly disabled the warning:

no warnings “experimental::try”;

This feature enables the try and catch syntax, which allows exception handling, where exceptions thrown from the body of the block introduced with try are caught by executing the body of the catch block.

For more information, see Try Catch Exception Handling in perlsyn.

FEATURE BUNDLES

It’s possible to load multiple features together, using a feature bundle. The name of a feature bundle is prefixed with a colon, to distinguish it from an actual feature.

use feature “:5.10”;

The following feature bundles are available:

bundle features included ----–— ------------–— :default indirect multidimensional bareword_filehandles :5.10 bareword_filehandles indirect multidimensional say state switch :5.12 bareword_filehandles indirect multidimensional say state switch unicode_strings :5.14 bareword_filehandles indirect multidimensional say state switch unicode_strings :5.16 bareword_filehandles current_sub evalbytes fc indirect multidimensional say state switch unicode_eval unicode_strings :5.18 bareword_filehandles current_sub evalbytes fc indirect multidimensional say state switch unicode_eval unicode_strings :5.20 bareword_filehandles current_sub evalbytes fc indirect multidimensional say state switch unicode_eval unicode_strings :5.22 bareword_filehandles current_sub evalbytes fc indirect multidimensional say state switch unicode_eval unicode_strings :5.24 bareword_filehandles current_sub evalbytes fc indirect multidimensional postderef_qq say state switch unicode_eval unicode_strings :5.26 bareword_filehandles current_sub evalbytes fc indirect multidimensional postderef_qq say state switch unicode_eval unicode_strings :5.28 bareword_filehandles bitwise current_sub evalbytes fc indirect multidimensional postderef_qq say state switch unicode_eval unicode_strings :5.30 bareword_filehandles bitwise current_sub evalbytes fc indirect multidimensional postderef_qq say state switch unicode_eval unicode_strings :5.32 bareword_filehandles bitwise current_sub evalbytes fc indirect multidimensional postderef_qq say state switch unicode_eval unicode_strings :5.34 bareword_filehandles bitwise current_sub evalbytes fc indirect multidimensional postderef_qq say state switch unicode_eval unicode_strings

The :default bundle represents the feature set that is enabled before any use feature or no feature declaration.

Specifying sub-versions such as the 0 in 5.14.0 in feature bundles has no effect. Feature bundles are guaranteed to be the same for all sub-versions.

use feature “:5.14.0”; # same as “:5.14” use feature “:5.14.1”; # same as “:5.14”

IMPLICIT LOADING

Instead of loading feature bundles by name, it is easier to let Perl do implicit loading of a feature bundle for you.

There are two ways to load the feature pragma implicitly:

  • By using the -E switch on the Perl command-line instead of -e. That will enable the feature bundle for that version of Perl in the main compilation unit (that is, the one-liner that follows -E).
  • By explicitly requiring a minimum Perl version number for your program, with the use VERSION construct. That is, use v5.10.0; will do an implicit no feature :all; use feature :5.10; and so on. Note how the trailing sub-version is automatically stripped from the version. But to avoid portability warnings (see use in perlfunc), you may prefer: use 5.010; with the same effect. If the required version is older than Perl 5.10, the :default feature bundle is automatically loaded instead. Unlike use feature ":5.12", saying use v5.12 (or any higher version) also does the equivalent of use strict; see use in perlfunc for details.

Author: dt

Created: 2022-02-20 Sun 15:11