Manpages - TIFFWriteScanline.3tiff

TIFFWriteScanline - write a scanline to an open

file

#include <tiffio.h>

int TIFFWriteScanline(TIFF **/tif/, tdata_t buf, uint32_t row, tsample_t sample)*

Write data to a file at the specified row. The sample parameter is used only if data are organized in separate planes ( /PlanarConfiguration/=2). The data are assumed to be uncompressed and in the native bit- and byte-order of the host machine. The data written to the file is compressed according to the compression scheme of the current

directory (see further below). If the current scanline is past the end of the current subfile, the ImageLength field is automatically increased to include the scanline (except for PlanarConfiguration/=2, where the /ImageLength cannot be changed once the first data are written). If the ImageLength is increased, the StripOffsets and StripByteCounts fields are similarly enlarged to reflect data written past the previous end of image.

The library writes encoded data using the native machine byte order. Correctly implemented

readers are expected to do any necessary byte-swapping to correctly process image data with BitsPerSample greater than 8. The library attempts to hide bit-ordering differences between the image and the native machine by converting data from the native machine order.

In C++ the sample parameter defaults to 0.

Once data are written to a file for the current directory, the values of certain tags may not be altered; see /TIFFSetField/(3TIFF) for more information.

It is not possible to write scanlines to a file that uses a tiled organization. The routine TIFFIsTiled can be used to determine if the file is organized as tiles or strips.

TIFFWriteScanline returns -1 if it immediately detects an error and 1 for a successful write.

All error messages are directed to the /TIFFError/(3TIFF) routine.

“%s:*File*not*open*for*writing.* The file was opened for reading, not writing.

Can not write scanlines to a tiled image. An attempt was made to write a scanline to a tiled image. The image is assumed to be organized in tiles because the TileWidth and TileLength tags have been set with /TIFFSetField/(3TIFF).

Compression algorithm does not support random access. Data was written in a non-sequential order to a file that uses a compression algorithm and that has RowsPerStrip greater than one. That is, data in the image is to be stored in a compressed form, and with multiple rows packed into a strip. In this case, the library does not support random access to the data. The data should either be written as entire strips, sequentially by rows, or the value of RowsPerStrip should be set to one.

%s: Must set “ImageWidth” before writing data. The image’s width has not be set before the first write. See *TIFFSetField*(3TIFF) for information on how to do this.

%s: Must set “PlanarConfiguration” before writing data. The organization of data has not be defined before the first write. See *TIFFSetField*(3TIFF) for information on how to do this.

Can not change “ImageLength” when using separate planes. Separate image planes are being used ( /PlanarConfiguration/=2), but the number of rows has not been specified before the first write. The library supports the dynamic growth of an image only when data are organized in a contiguous manner ( /PlanarConfiguration/=1).

%d: Sample out of range, max %d. The sample parameter was greater than the value of the SamplesPerPixel tag.

“%s:*No*space*for*strip*arrays.* There was not enough space for the arrays that hold strip offsets and byte counts.

Writing subsampled YCbCR data does not work correctly because, for /PlanarConfiguration/=2 the size of a scanline is not calculated on a per-sample basis, and for /PlanarConfiguration/=1 the library does not pack the block-interleaved samples.

*TIFFOpen*(3TIFF), *TIFFWriteEncodedStrip*(3TIFF), *TIFFWriteRawStrip*(3TIFF), *libtiff*(3TIFF)

Libtiff library home page: http://www.simplesystems.org/libtiff/