Man1 - virt-clone.1

virt-clone - clone existing virtual machine images

virt-clone [OPTION]…

virt-clone is a command line tool for cloning existing virtual machine images using the libvirt hypervisor management library. It will copy the disk images of any existing virtual machine, and define a new guest with an identical virtual hardware configuration. Elements which require uniqueness will be updated to avoid a clash between old and new guests.

By default, virt-clone will show an error if the necessary information to clone the guest is not provided. The –auto-clone option will generate all needed input, aside from the source guest to clone.

Please note, virt-clone does not change anything inside the guest OS, it only duplicates disks and does host side changes. So things like changing passwords, changing static IP address, etc are outside the scope of this tool. For these types of changes, please see virt-sysprep.

Most options are not required. Minimum requirements are –original or –original-xml (to specify the guest to clone), –name, and appropriate storage options via -file.

*–connect URI*

Connect to a non-default hypervisor. See virt-install(1) for details

*-o, –original ORIGINAL_GUEST*

Name of the original guest to be cloned. This guest must be shut off.

*–original-xml ORIGINAL_XML*

Libvirt guest xml file to use as the original guest. The guest does not need to be defined on the libvirt connection. This takes the place of the –original parameter.

–auto-clone

Generate a new guest name, and paths for new storage.

An example of possible generated output:

#+begin_quote

#+begin_quote

        Original name        : MyVM
        Generated clone name : MyVM-clone

        Original disk path   : /home/user/foobar.img
        Generated disk path  : /home/user/foobar-clone.img

#+end_quote

If generated names collide with existing VMs or storage, a number is appended, such as foobar-clone-1.img, or MyVM-clone-3.

*-n, –name NAME*

Name of the new guest virtual machine instance. This must be unique amongst all guests known to the hypervisor connection, including those not currently active.

*-u, –uuid UUID*

UUID for the guest; if none is given a random UUID will be generated. If you specify UUID, you should use a 32-digit hexadecimal number. UUID are intended to be unique across the entire data center, and indeed world. Bear this in mind if manually specifying a UUID

*-f, –file PATH*

Path to the file, disk partition, or logical volume to use as the backing store for the new guest’s virtual disk. If the original guest has multiple disks, this parameter must be repeated multiple times, once per disk in the original virtual machine.

*–nvram NVRAMFILE*

Optional path to the new nvram VARS file, if no path is specified and the guest has nvram the new nvram path will be auto-generated. If the guest doesn’t have nvram this option will be ignored.

*–force-copy TARGET*

Force cloning the passed disk target (’hdc’, ’sda’, etc.). By default, virt-clone will skip certain disks, such as those marked ’readonly’ or ’shareable’.

*–skip-copy TARGET*

Skip cloning the passed disk target (’hdc’, ’sda’, etc.). By default, virt-clone will clone certain disk images, typically read/write devices. Use this to skip copying of a specific device, so the new VM uses the same storage path as the original VM.

–nonsparse

Fully allocate the new storage if the path being cloned is a sparse file. See virt-install(1) for more details on sparse vs. nonsparse.

–preserve-data

No storage is cloned: disk images specific by –file are preserved as is, and referenced in the new clone XML. This is useful if you want to clone a VM XML template, but not the storage contents.

–reflink

When –reflink is specified, perform a lightweight copy. This is much faster if source images and destination images are all on the same btrfs filesystem. If COW copy is not possible, then virt-clone fails.

*-m, –mac MAC*

Fixed MAC address for the guest; If this parameter is omitted, or the value RANDOM is specified a suitable address will be randomly generated. Addresses are applied sequentially to the networks as they are listed in the original guest XML.

–print-xml

Print the generated clone XML and exit without cloning.

–replace

Shutdown and remove any existing guest with the passed –name before cloning the original guest.

*-h, –help*

Show the help message and exit

–version

Show program’s version number and exit

–check

Enable or disable some validation checks. See virt-install(1) for more details.

*-q, –quiet*

Suppress non-error output.

*-d, –debug*

Print debugging information to the terminal when running the install process. The debugging information is also stored in ~/.cache/virt-manager/virt-clone.log even if this parameter is omitted.

#+end_quote

Clone the guest called demo on the default connection, auto generating a new name and disk clone path.

#+begin_quote

      # virt-clone \
           --original demo \
           --auto-clone

#+end_quote

Clone the guest called demo which has a single disk to copy

#+begin_quote

      # virt-clone \
           --original demo \
           --name newdemo \
           --file /var/lib/xen/images/newdemo.img

#+end_quote

Clone a QEMU guest with multiple disks

#+begin_quote

      # virt-clone \
           --connect qemu:///system \
           --original demo \
           --name newdemo \
           --file /var/lib/xen/images/newdemo.img \
           --file /var/lib/xen/images/newdata.img

#+end_quote

Clone a guest to a physical device which is at least as big as the original guests disks. If the destination device is bigger, the new guest can do a filesystem resize when it boots.

#+begin_quote

      # virt-clone \
           --connect qemu:///system \
           --original demo \
           --name newdemo \
           --file /dev/HostVG/DemoVM \
           --mac 52:54:00:34:11:54

#+end_quote

Please see https://virt-manager.org/bugs

Copyright (C) Fujitsu Limited, Copyright (C) Red Hat, Inc, and various contributors. This is free software. You may redistribute copies of it under the terms of the GNU General Public License https://www.gnu.org/licenses/gpl.html. There is NO WARRANTY, to the extent permitted by law.

virt-sysprep(1), virsh(1), virt-install(1), virt-manager(1), the project website https://virt-manager.org