Man1 - v4l2-ctl.1

v4l2-ctl - An application to control video4linux drivers

v4l2-ctl [/-h/] [/-d <dev>/] [many other options]

The v4l2-ctl tool is used to control video4linux devices, either video, vbi, radio or swradio, both input and output. It is able to control almost any aspect of such devices covering the full V4L2 API.

-d, –device <dev>

Use device <dev> as the V4L2 device. if <dev> starts with a digit, then dev/video/<dev> is used Otherwise if -z was specified earlier, then <dev> is the entity name or interface ID (if prefixed with 0x) as found in the topology of the media device with the bus info string as specified by the -z option.

-v, –verbose

Turn on verbose reporting.

–version

Show version information.

-w, –wrapper

Use the libv4l2 wrapper library for all V4L2 device accesses. By default v4l2-ctl will directly access the V4L2 device, but with this option all access will go via this wrapper library.

-h, –help

Prints the help message.

–help-io

Prints the help message for all options that get/set/list inputs and outputs, both video and audio.

–help-misc

Prints the help message for miscellaneous options.

–help-overlay

Prints the help message for all options that get/set/list overlay and framebuffer formats.

–help-sdr

Prints the help message for all options that get/set/list software defined radio formats.

–help-selection

Prints the help message for all options that deal with selections (cropping and composing).

–help-stds

Prints the help message for all options that deal with SDTV standards and Digital Video timings.

–help-streaming

Prints the help message for all options that deal with streaming.

–help-subdev

Prints the help message for all options that deal with v4l-subdevX devices.

–help-tuner

Prints the help message for all options that deal with tuners and modulators.

–help-vbi

Prints the help message for all options that get/set/list VBI formats.

–help-vidcap

Prints the help message for all options that get/set/list video capture formats.

–help-vidout

Prints the help message for all options that get/set/list video output formats.

–help-edid

Prints the help message for all options that get/set EDIDs.

–help-all

Prints the help message for all options.

–all

Display all information available.

-C, –get-ctrl <ctrl>[,/<ctrl>/…]

Get the value of the controls [VIDIOC_G_EXT_CTRLS].

-c, –set-ctrl <ctrl>/=/<val>[,/<ctrl>/=/<val>/…]

Set the value of the controls [VIDIOC_S_EXT_CTRLS].

-D, –info

Show driver info [VIDIOC_QUERYCAP].

-e, –out-device <dev>

Use device <dev> for output streams instead of the default device as set with –device. If <dev> starts with a digit, then dev/video/<dev> is used. Otherwise if -z was specified earlier, then <dev> is the entity name or interface ID (if prefixed with 0x) as found in the topology of the media device with the bus info string as specified by the -z option.

-E, –export-device <dev>

Use device <dev> for exporting DMA buffers. If <dev> starts with a digit, then dev/video/<dev> is used. Otherwise if -z was specified earlier, then <dev> is the entity name or interface ID (if prefixed with 0x) as found in the topology of the media device with the bus info string as specified by the -z option.

-z, –media-bus-info <bus-info>

Find the media device with the given <bus-info> string. If set, then -d, -e and -E options can use the entity name or interface ID to refer to the device nodes. Example: v4l2-ctl -z platform:vivid-000 -d vivid-000-vid-cap

-k, –concise

Be more concise if possible.

-l, –list-ctrls

Display all controls and their values [VIDIOC_QUERYCTRL].

-L, –list-ctrls-menus

Display all controls and their menus [VIDIOC_QUERYMENU].

-r, –subset <ctrl>[,/<offset>/,/<size>/]+

The subset of the N-dimensional array to get/set for control <ctrl>, for every dimension an (<offset>, <size>) tuple is given.

–list-devices

List all v4l devices. If -z was given, then list just the devices of the media device with the bus info string as specified by the -z option.

–log-status

Log the board status in the kernel log [VIDIOC_LOG_STATUS].

–get-priority

Query the current access priority [VIDIOC_G_PRIORITY].

–set-priority <prio>

Set the new access priority [VIDIOC_S_PRIORITY]. <prio> is 1 (background), 2 (interactive) or 3 (record).

–silent

Only set the result code, do not print any messages.

–sleep <secs>

Sleep <secs>, call QUERYCAP and close the file handle.

On success, it returns 0. Otherwise, it will return the error code.

Query the device information of /dev/video1:

v4l2-ctl -d1 -D

Stream video using MMAP stream I/O from /dev/video0:

v4l2-ctl -d0 –stream-mmap

Stream one frame of video from /dev/video0 and store it in a file:

v4l2-ctl –stream-mmap –stream-count=1 –stream-to=file.raw

Stream video from /dev/video0 and stream it over the network:

v4l2-ctl –stream-mmap –stream-to-host <hostname>

Use ’qvidcap -p’ on the host to view the video.

Stream video from /dev/video0 using DMABUFs exported from /dev/video2:

v4l2-ctl –stream-dmabuf –export-device /dev/video2

Stream video from a memory-to-memory device:

v4l2-ctl –stream-mmap –stream-out-mmap

Stream video from a capture video device (/dev/video1) to an output video device (/dev/video2):

v4l2-ctl -d1 –stream-mmap –out-device /dev/video2 –stream-out-dmabuf

This manual page is a work in progress.

Bug reports or questions about this utility should be sent to the linux-media@vger.kernel.org mailinglist.