Man1 - tificc.1

tificc - little cms ICC profile applier for TIFF.

tificc [/options/]/ input.tif output.tif/

lcms is a standalone CMM engine, which deals with the color management. It implements a fast transformation between ICC profiles. tificc is a little cms ICC profile applier for TIFF.

-a

Handle channels > 4 as alpha.

-b

Black point compensation.

*-c */NUM/

Precalculates transform (0=Off, 1=Normal, 2=Hi-res, 3=LoRes) [defaults to 1].

*-d */NUM/

Observer adaptation state (abs.col. only), (0..1.0, float value) [defaults to 0.0].

-e

Embed destination profile.

-g

Marks out-of-gamut colors on softproof.

*-h */NUM/

Show summary of options and examples (0=help, 1=Examples, 2=Built-in profiles, 3=Contact information)

-i profile

Input profile (defaults to sRGB).

*-k */inklimit/

Ink-limiting in % (CMYK only), (0..400.0, float value) [default 400.0].

-l profile

Transform by device-link profile.

-m TODO: check if values outside 0..3 are possible

SoftProof intent [defaults to 0].

-n

Ignore embedded profile on input.

*-o */profile/

Output profile (defaults to sRGB).

*-p */profile/

Soft proof profile.

*-s */newprofile/

Save embedded profile as newprofile.

-t NUM

Rendering intent

  0=Perceptual [default]
  1=Relative colorimetric
  2=Saturation
  3=Absolute colorimetric
  10=Perceptual preserving black ink
  11=Relative colorimetric preserving black ink
  12=Saturation preserving black ink
  13=Perceptual preserving black plane
  14=Relative colorimetric preserving black plane
  15=Saturation preserving black plane

-v

Verbose.

*-w */NUM/

Output depth (8, 16 or 32). Use 32 for floating-point.

  	*Lab2  -- D50-based v2 CIEL*a*b
  	*Lab4  -- D50-based v4 CIEL*a*b
  	*Lab   -- D50-based v4 CIEL*a*b
  	*XYZ   -- CIE XYZ (PCS)
  	*sRGB  -- sRGB color space
  	*Gray22 - Monochrome of Gamma 2.2
  	*Gray30 - Monochrome of Gamma 3.0
  	*null   - Monochrome black for all input
  	*Lin2222- CMYK linearization of gamma 2.2 on each channel

  To color correct from scanner to sRGB:
  	tificc -iscanner.icm in.tif out.tif
  To convert from monitor1 to monitor2:
  	tificc -imon1.icm -omon2.icm in.tif out.tif
  To make a CMYK separation:
  	tificc -oprinter.icm inrgb.tif outcmyk.tif
  To recover sRGB from a CMYK separation:
  	tificc -iprinter.icm incmyk.tif outrgb.tif
  To convert from CIELab TIFF to sRGB
  	tificc -i*Lab in.tif out.tif

For suggestions, comments, bug reports etc. send mail to info@littlecms.com.

*jpgicc*(1), *linkicc*(1), *psicc*(1), *transicc*(1)

This manual page was originally written by Shiju p. Nair <shiju.p@gmail.com>, for the Debian project. Modified by Marti Maria to reflect further changes.