Man1 - syslinux.1

All the configurable defaults in SYSLINUX can be changed by putting a file called syslinux.cfg in the install directory of the boot disk. This is a text file in either UNIX or DOS format, containing one or more of the following items (case is insensitive for keywords).

This list is out of date.

In the configuration file blank lines and comment lines beginning with a hash mark (#) are ignored.

*default*/ kernel [ options … ]/

Sets the default command line. If *syslinux*/ boots automatically,/ it will act just as if the entries after “default” had been typed in at the “boot:” prompt.

If no DEFAULT or UI statement is found, or the configuration file is missing entirely, SYSLINUX drops to the boot: prompt with an error message (if NOESCAPE is set, it stops with a “boot failed” message; this is also the case for PXELINUX if the configuration file is not found.)

(no term)

NOTE: Until SYSLINUX 3.85, if no configuration file is present, or no :: “default” entry is present in the configuration file, the default is “linux auto”.

Even earlier versions of SYSLINUX used to automatically

append the string “auto” to whatever the user specified using the DEFAULT command. As of version 1.54, this is no longer true, as it caused problems when using a shell as a substitute for “init.” You may want to include this option manually.

*append*/ options …/

Add one or more options to the kernel command line. These are added both for automatic and manual boots. The options are added at the very beginning of the kernel command line, usually permitting explicitly entered kernel options to override them. This is the equivalent of the *lilo*(8) “append” option.

  label label
  kernel image
  append options ...

Indicates that if label is entered as the kernel to boot, /*syslinux* should/ instead boot image, and the specified “append” options should be used instead of the ones specified in the global section of the file (before the first “label” command.) The default for image is the same as label, and if no “append” is given the default is to use the global entry (if any). Use “append -” to use no options at all. Up to 128 “label” entries are permitted.

#+begin_quote The “image” doesn’t have to be a Linux kernel; it can be a boot sector (see below.)

#+end_quote

*implicit */flag_val/

If flag_val is 0, do not load a kernel image unless it has been explicitly named in a “label” statement. The default is 1.

*timeout */timeout/

Indicates how long to wait at the “boot:” prompt until booting automatically, in units of 1/10 s. The timeout is cancelled as soon as the user types anything on the keyboard, the assumption being that the user will complete the command line already begun. A timeout of zero will disable the timeout completely, this is also the default. The maximum possible timeout value is 35996; corresponding to just below one hour.

*serial*/ port [ baudrate ]/

Enables a serial port to act as the console. “port” is a number (0 = /dev/ttyS0 = COM1, etc.); if “baudrate” is omitted, the baud rate defaults to 9600 bps. The serial parameters are hardcoded to be 8 bits, no parity, 1 stop bit.

For this directive to be guaranteed to work properly, it should be the first directive in the configuration file.

*font */filename/

Load a font in .psf format before displaying any output (except the copyright line, which is output as ldlinux.sys itself is loaded.) *syslinux*/ only loads/ the font onto the video card; if the .psf file contains a Unicode table it is ignored. This only works on EGA and VGA cards; hopefully it should do nothing on others.

*kbdmap */keymap/

Install a simple keyboard map. The keyboard remapper used is very simplistic (it simply remaps the keycodes received from the BIOS, which means that only the key combinations relevant in the default layout - usually U.S. English - can be mapped) but should at least help people with AZERTY keyboard layout and the locations of = and , (two special characters used heavily on the Linux kernel command line.)

The included program *keytab-lilo.pl*(8) from the *lilo*(8) distribution can be used to create such keymaps.

*display */filename/

Displays the indicated file on the screen at boot time (before the boot: prompt, if displayed). Please see the section below on DISPLAY files. If the file is missing, this option is simply ignored.

*prompt */flag_val/

If flag_val is 0, display the “boot:” prompt only if the Shift or Alt key is pressed, or Caps Lock or Scroll lock is set (this is the default). If flag_val is 1, always display the “boot:” prompt.

  f1 filename
  f2 filename
  ...
  f9 filename
  f10 filename
  f11 filename
  f12 filename

Displays the indicated file on the screen when a function key is pressed at the “boot:” prompt. This can be used to implement pre-boot online help (presumably for the kernel command line options.)

When using the serial console, press <Ctrl-F><digit> to get to the help screens, e.g. <Ctrl-F>2 to get to the f2 screen. For f10-f12, hit <Ctrl-F>A, <Ctrl-F>B, <Ctrl-F>C. For compatiblity with earlier versions, f10 can also be entered as <Ctrl-F>0.

DISPLAY and function-key help files are text files in either DOS or UNIX format (with or without <CR>). In addition, the following special codes are interpreted:

<FF> = <Ctrl-L> = ASCII 12

Clear the screen, home the cursor. Note that the screen is filled with the current display color.

<SI><bg><fg>, <SI> = <Ctrl-O> = ASCII 15

Set the display colors to the specified background and foreground colors, where <bg> and <fg> are hex digits, corresponding to the standard PC display attributes:

    0 = black	8 = dark grey
    1 = dark blue	9 = bright blue
    2 = dark green	a = bright green
    3 = dark cyan	b = bright cyan
    4 = dark red	c = bright red
    5 = dark purple	d = bright purple
    6 = brown	e = yellow
    7 = light grey	f = white

Picking a bright color (8-f) for the background results in the corresponding dark color (0-7), with the foreground flashing.

colors are not visible over the serial console.

<CAN>filename<newline>, <CAN> = <Ctrl-X> = ASCII 24

If a VGA display is present, enter graphics mode and display the graphic included in the specified file. The file format is an ad hoc format called LSS16; the included Perl program “ppmtolss16” can be used to produce these images. This Perl program also includes the file format specification.

The image is displayed in 640x480 16-color mode. Once in graphics mode, the display attributes (set by <SI> code sequences) work slightly differently: the background color is ignored, and the foreground colors are the 16 colors specified in the image file. For that reason, ppmtolss16 allows you to specify that certain colors should be assigned to specific color indicies.

Color indicies 0 and 7, in particular, should be chosen with care: 0 is the background color, and 7 is the color used for the text printed by SYSLINUX itself.

<EM>, <EM> = <Ctrl-U> = ASCII 25

If we are currently in graphics mode, return to text mode.

/<DLE>..<ETB>/*, <Ctrl-P>..*/<Ctrl-W>/* = ASCII 16-23*

These codes can be used to select which modes to print a certain part of the message file in. Each of these control characters select a specific set of modes (text screen, graphics screen, serial port) for which the output is actually displayed:

    Character                       Text    Graph   Serial
    ------------------------------------------------------
    <DLE> = <Ctrl-P> = ASCII 16     No      No      No
    <DC1> = <Ctrl-Q> = ASCII 17     Yes     No      No
    <DC2> = <Ctrl-R> = ASCII 18     No      Yes     No
    <DC3> = <Ctrl-S> = ASCII 19     Yes     Yes     No
    <DC4> = <Ctrl-T> = ASCII 20     No      No      Yes
    <NAK> = <Ctrl-U> = ASCII 21     Yes     No      Yes
    <SYN> = <Ctrl-V> = ASCII 22     No      Yes     Yes
    <ETB> = <Ctrl-W> = ASCII 23     Yes     Yes     Yes

For example:

  <DC1>Text mode<DC2>Graphics mode<DC4>Serial port<ETB>

… will actually print out which mode the console is in!

/<SUB>/* = <Ctrl-Z> = ASCII 26*

End of file (DOS convention).

This version of syslinux supports chain loading of other operating systems (such as MS-DOS and its derivatives, including Windows 95/98).

Chain loading requires the boot sector of the foreign operating system to be stored in a file in the root directory of the filesystem. Because neither Linux kernels, nor boot sector images have reliable magic numbers, syslinux will look at the file extension. The following extensions are recognised:

  none or other	Linux kernel image
  BSS	Boot sector (DOS superblock will be patched in)
  BS	Boot sector

For filenames given on the command line, syslinux will search for the file by adding extensions in the order listed above if the plain filename is not found. Filenames in KERNEL statements must be fully qualified.

Syslinux will attempt to detect if the user is trying to boot on a 286 or lower class machine, or a machine with less than 608K of low (“DOS”) RAM (which means the Linux boot sequence cannot complete). If so, a message is displayed and the boot sequence aborted. Holding down the Ctrl key while booting disables this feature.

The compile time and date of a specific syslinux version can be obtained by the DOS command “type ldlinux.sys”. This is also used as the signature for the LDLINUX.SYS file, which must match the boot sector

Any file that syslinux uses can be marked hidden, system or readonly if so is convenient; syslinux ignores all file attributes. The SYSLINUX installed automatically sets the readonly attribute on LDLINUX.SYS.

SYSLINUX can be used to create bootdisk images for El Torito-compatible bootable CD-ROMs. However, it appears that many BIOSes are very buggy when it comes to booting CD-ROMs. Some users have reported that the following steps are helpful in making a CD-ROM that is bootable on the largest possible number of machines:

• Use the -s (safe, slow and stupid) option to SYSLINUX
• Put the boot image as close to the beginning of the ISO 9660 filesystem as possible.

A CD-ROM is so much faster than a floppy that the -s option shouldn’t matter from a speed perspective.

Of course, you probably want to use ISOLINUX instead. See the documentation file isolinux.doc.

SYSLINUX can boot from a FAT filesystem partition on a hard disk (including FAT32). The installation procedure is identical to the procedure for installing it on a floppy, and should work under either DOS or Linux. To boot from a partition, SYSLINUX needs to be launched from a Master Boot Record or another boot loader, just like DOS itself would. A sample master boot sector (mbr.bin) is included with SYSLINUX.