Man1 - ssh.1

(SSH client) is a program for logging into a remote machine and for executing commands on a remote machine. It is intended to provide secure encrypted communications between two untrusted hosts over an insecure network. X11 connections, arbitrary TCP ports and

sockets can also be forwarded over the secure channel.

connects and logs into the specified

which may be specified as either

or a URI of the form

The user must prove their identity to the remote machine using one of several methods (see below).

If a

is specified, it will be executed on the remote host instead of a login shell. A complete command line may be specified as

or it may have additional arguments. If supplied, the arguments will be appended to the command, separated by spaces, before it is sent to the server to be executed.

The options are as follows:

Forces

to use IPv4 addresses only.

Forces

to use IPv6 addresses only.

Enables forwarding of connections from an authentication agent such as

This can also be specified on a per-host basis in a configuration file.

Agent forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the agent’s

socket) can access the local agent through the forwarded connection. An attacker cannot obtain key material from the agent, however they can perform operations on the keys that enable them to authenticate using the identities loaded into the agent. A safer alternative may be to use a jump host (see

Disables forwarding of the authentication agent connection.

Bind to the address of

before attempting to connect to the destination host. This is only useful on systems with more than one address.

Use

on the local machine as the source address of the connection. Only useful on systems with more than one address.

Requests compression of all data (including stdin, stdout, stderr, and data for forwarded X11, TCP and

connections). The compression algorithm is the same used by

Compression is desirable on modem lines and other slow connections, but will only slow down things on fast networks. The default value can be set on a host-by-host basis in the configuration files; see the

option.

Selects the cipher specification for encrypting the session.

is a comma-separated list of ciphers listed in order of preference. See the

keyword in

for more information.

Specifies a local

application-level port forwarding. This works by allocating a socket to listen to

on the local side, optionally bound to the specified

Whenever a connection is made to this port, the connection is forwarded over the secure channel, and the application protocol is then used to determine where to connect to from the remote machine. Currently the SOCKS4 and SOCKS5 protocols are supported, and

will act as a SOCKS server. Only root can forward privileged ports. Dynamic port forwardings can also be specified in the configuration file.

IPv6 addresses can be specified by enclosing the address in square brackets. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the

setting. However, an explicit

may be used to bind the connection to a specific address. The

of

indicates that the listening port be bound for local use only, while an empty address or

indicates that the port should be available from all interfaces.

Append debug logs to

instead of standard error.

Sets the escape character for sessions with a pty (default:

The escape character is only recognized at the beginning of a line. The escape character followed by a dot

closes the connection; followed by control-Z suspends the connection; and followed by itself sends the escape character once. Setting the character to

disables any escapes and makes the session fully transparent.

Specifies an alternative per-user configuration file. If a configuration file is given on the command line, the system-wide configuration file

will be ignored. The default for the per-user configuration file is

If set to

no configuration files will be read.

Requests

to go to background just before command execution. This is useful if

is going to ask for passwords or passphrases, but the user wants it in the background. This implies

The recommended way to start X11 programs at a remote site is with something like

If the

configuration option is set to

then a client started with

will wait for all remote port forwards to be successfully established before placing itself in the background. Refer to the description of

in

for details.

Causes

to print its configuration after evaluating

and

blocks and exit.

Allows remote hosts to connect to local forwarded ports. If used on a multiplexed connection, then this option must be specified on the master process.

Specify the PKCS#11 shared library

should use to communicate with a PKCS#11 token providing keys for user authentication.

Selects a file from which the identity (private key) for public key authentication is read. You can also specify a public key file to use the corresponding private key that is loaded in

when the private key file is not present locally. The default is

and

Identity files may also be specified on a per-host basis in the configuration file. It is possible to have multiple

options (and multiple identities specified in configuration files). If no certificates have been explicitly specified by the

directive,

will also try to load certificate information from the filename obtained by appending

to identity filenames.

Connect to the target host by first making a

connection to the jump host described by

and then establishing a TCP forwarding to the ultimate destination from there. Multiple jump hops may be specified separated by comma characters. This is a shortcut to specify a

configuration directive. Note that configuration directives supplied on the command-line generally apply to the destination host and not any specified jump hosts. Use

to specify configuration for jump hosts.

Enables GSSAPI-based authentication and forwarding (delegation) of GSSAPI credentials to the server.

Disables forwarding (delegation) of GSSAPI credentials to the server.

Specifies that connections to the given TCP port or Unix socket on the local (client) host are to be forwarded to the given host and port, or Unix socket, on the remote side. This works by allocating a socket to listen to either a TCP

on the local side, optionally bound to the specified

or to a Unix socket. Whenever a connection is made to the local port or socket, the connection is forwarded over the secure channel, and a connection is made to either

port

or the Unix socket

from the remote machine.

Port forwardings can also be specified in the configuration file. Only the superuser can forward privileged ports. IPv6 addresses can be specified by enclosing the address in square brackets.

By default, the local port is bound in accordance with the

setting. However, an explicit

may be used to bind the connection to a specific address. The

of

indicates that the listening port be bound for local use only, while an empty address or

indicates that the port should be available from all interfaces.

Specifies the user to log in as on the remote machine. This also may be specified on a per-host basis in the configuration file.

Places the

client into

mode for connection sharing. Multiple

options places

into

mode but with confirmation required using

before each operation that changes the multiplexing state (e.g. opening a new session). Refer to the description of

in

for details.

A comma-separated list of MAC (message authentication code) algorithms, specified in order of preference. See the

keyword for more information.

Do not execute a remote command. This is useful for just forwarding ports. Refer to the description of

in

for details.

Redirects stdin from

(actually, prevents reading from stdin). This must be used when

is run in the background. A common trick is to use this to run X11 programs on a remote machine. For example,

will start an emacs on shadows.cs.hut.fi, and the X11 connection will be automatically forwarded over an encrypted channel. The

program will be put in the background. (This does not work if

needs to ask for a password or passphrase; see also the

option.) Refer to the description of

in

for details.

Control an active connection multiplexing master process. When the

option is specified, the

argument is interpreted and passed to the master process. Valid commands are:

(check that the master process is running),

(request forwardings without command execution),

(cancel forwardings),

(request the master to exit), and

(request the master to stop accepting further multiplexing requests).

Can be used to give options in the format used in the configuration file. This is useful for specifying options for which there is no separate command-line flag. For full details of the options listed below, and their possible values, see

Port to connect to on the remote host. This can be specified on a per-host basis in the configuration file.

Queries for the algorithms supported by one of the following features:

(supported symmetric ciphers),

(supported symmetric ciphers that support authenticated encryption),

(supported query terms for use with the

flag),

(supported message integrity codes),

(key exchange algorithms),

(key types),

(certificate key types),

(non-certificate key types),

(all key types and signature algorithms),

(supported SSH protocol versions), and

(supported signature algorithms). Alternatively, any keyword from

or

that takes an algorithm list may be used as an alias for the corresponding query_option.

Quiet mode. Causes most warning and diagnostic messages to be suppressed.

Specifies that connections to the given TCP port or Unix socket on the remote (server) host are to be forwarded to the local side.

This works by allocating a socket to listen to either a TCP

or to a Unix socket on the remote side. Whenever a connection is made to this port or Unix socket, the connection is forwarded over the secure channel, and a connection is made from the local machine to either an explicit destination specified by

port

or

or, if no explicit destination was specified,

will act as a SOCKS 4/5 proxy and forward connections to the destinations requested by the remote SOCKS client.

Port forwardings can also be specified in the configuration file. Privileged ports can be forwarded only when logging in as root on the remote machine. IPv6 addresses can be specified by enclosing the address in square brackets.

By default, TCP listening sockets on the server will be bound to the loopback interface only. This may be overridden by specifying a

An empty

or the address

indicates that the remote socket should listen on all interfaces. Specifying a remote

will only succeed if the server’s

option is enabled (see

If the

argument is

the listen port will be dynamically allocated on the server and reported to the client at run time. When used together with

the allocated port will be printed to the standard output.

Specifies the location of a control socket for connection sharing, or the string

to disable connection sharing. Refer to the description of

and

in

for details.

May be used to request invocation of a subsystem on the remote system. Subsystems facilitate the use of SSH as a secure transport for other applications (e.g.

The subsystem is specified as the remote command. Refer to the description of

in

for details.

Disable pseudo-terminal allocation.

Force pseudo-terminal allocation. This can be used to execute arbitrary screen-based programs on a remote machine, which can be very useful, e.g. when implementing menu services. Multiple

options force tty allocation, even if

has no local tty.

Display the version number and exit.

Verbose mode. Causes

to print debugging messages about its progress. This is helpful in debugging connection, authentication, and configuration problems. Multiple

options increase the verbosity. The maximum is 3.

Requests that standard input and output on the client be forwarded to

on

over the secure channel. Implies

and

though these can be overridden in the configuration file or using

command line options.

Requests tunnel device forwarding with the specified

devices between the client

and the server

The devices may be specified by numerical ID or the keyword

which uses the next available tunnel device. If

is not specified, it defaults to

See also the

and

directives in

If the

directive is unset, it will be set to the default tunnel mode, which is

If a different

forwarding mode it desired, then it should be specified before

Enables X11 forwarding. This can also be specified on a per-host basis in a configuration file.

X11 forwarding should be enabled with caution. Users with the ability to bypass file permissions on the remote host (for the user’s X authorization database) can access the local X11 display through the forwarded connection. An attacker may then be able to perform activities such as keystroke monitoring.

For this reason, X11 forwarding is subjected to X11 SECURITY extension restrictions by default. Please refer to the

option and the

directive in

for more information.

Disables X11 forwarding.

Enables trusted X11 forwarding. Trusted X11 forwardings are not subjected to the X11 SECURITY extension controls.

Send log information using the

system module. By default this information is sent to stderr.

may additionally obtain configuration data from a per-user configuration file and a system-wide configuration file. The file format and configuration options are described in

The OpenSSH SSH client supports SSH protocol 2.

The methods available for authentication are: GSSAPI-based authentication, host-based authentication, public key authentication, keyboard-interactive authentication, and password authentication. Authentication methods are tried in the order specified above, though

can be used to change the default order.

Host-based authentication works as follows: If the machine the user logs in from is listed in

or

on the remote machine, the user is non-root and the user names are the same on both sides, or if the files

or

exist in the user’s home directory on the remote machine and contain a line containing the name of the client machine and the name of the user on that machine, the user is considered for login. Additionally, the server

be able to verify the client’s host key (see the description of

and

below) for login to be permitted. This authentication method closes security holes due to IP spoofing, DNS spoofing, and routing spoofing. [Note to the administrator:

and the rlogin/rsh protocol in general, are inherently insecure and should be disabled if security is desired.]

Public key authentication works as follows: The scheme is based on public-key cryptography, using cryptosystems where encryption and decryption are done using separate keys, and it is unfeasible to derive the decryption key from the encryption key. The idea is that each user creates a public/private key pair for authentication purposes. The server knows the public key, and only the user knows the private key.

implements public key authentication protocol automatically, using one of the DSA, ECDSA, Ed25519 or RSA algorithms. The HISTORY section of

contains a brief discussion of the DSA and RSA algorithms.

The file

lists the public keys that are permitted for logging in. When the user logs in, the

program tells the server which key pair it would like to use for authentication. The client proves that it has access to the private key and the server checks that the corresponding public key is authorized to accept the account.

The server may inform the client of errors that prevented public key authentication from succeeding after authentication completes using a different method. These may be viewed by increasing the

to

or higher (e.g. by using the

flag).

The user creates their key pair by running

This stores the private key in

(DSA),

(ECDSA),

(authenticator-hosted ECDSA),

(Ed25519),

(authenticator-hosted Ed25519), or

(RSA) and stores the public key in

(DSA),

(ECDSA),

(authenticator-hosted ECDSA),

(Ed25519),

(authenticator-hosted Ed25519), or

(RSA) in the user’s home directory. The user should then copy the public key to

in their home directory on the remote machine. The

file corresponds to the conventional

file, and has one key per line, though the lines can be very long. After this, the user can log in without giving the password.

A variation on public key authentication is available in the form of certificate authentication: instead of a set of public/private keys, signed certificates are used. This has the advantage that a single trusted certification authority can be used in place of many public/private keys. See the CERTIFICATES section of

for more information.

The most convenient way to use public key or certificate authentication may be with an authentication agent. See

and (optionally) the

directive in

for more information.

Keyboard-interactive authentication works as follows: The server sends an arbitrary

text and prompts for a response, possibly multiple times. Examples of keyboard-interactive authentication include

Authentication (see

and PAM (some

systems).

Finally, if other authentication methods fail,

prompts the user for a password. The password is sent to the remote host for checking; however, since all communications are encrypted, the password cannot be seen by someone listening on the network.

automatically maintains and checks a database containing identification for all hosts it has ever been used with. Host keys are stored in

in the user’s home directory. Additionally, the file

is automatically checked for known hosts. Any new hosts are automatically added to the user’s file. If a host’s identification ever changes,

warns about this and disables password authentication to prevent server spoofing or man-in-the-middle attacks, which could otherwise be used to circumvent the encryption. The

option can be used to control logins to machines whose host key is not known or has changed.

When the user’s identity has been accepted by the server, the server either executes the given command in a non-interactive session or, if no command has been specified, logs into the machine and gives the user a normal shell as an interactive session. All communication with the remote command or shell will be automatically encrypted.

If an interactive session is requested

by default will only request a pseudo-terminal (pty) for interactive sessions when the client has one. The flags

and

can be used to override this behaviour.

If a pseudo-terminal has been allocated the user may use the escape characters noted below.

If no pseudo-terminal has been allocated, the session is transparent and can be used to reliably transfer binary data. On most systems, setting the escape character to

will also make the session transparent even if a tty is used.

The session terminates when the command or shell on the remote machine exits and all X11 and TCP connections have been closed.

When a pseudo-terminal has been requested,

supports a number of functions through the use of an escape character.

A single tilde character can be sent as

or by following the tilde by a character other than those described below. The escape character must always follow a newline to be interpreted as special. The escape character can be changed in configuration files using the

configuration directive or on the command line by the

option.

The supported escapes (assuming the default

are:

Disconnect.

Background

List forwarded connections.

Background

at logout when waiting for forwarded connection / X11 sessions to terminate.

Display a list of escape characters.

Send a BREAK to the remote system (only useful if the peer supports it).

Open command line. Currently this allows the addition of port forwardings using the

and

options (see above). It also allows the cancellation of existing port-forwardings with

for local,

for remote and

for dynamic port-forwardings.

allows the user to execute a local command if the

option is enabled in

Basic help is available, using the

option.

Request rekeying of the connection (only useful if the peer supports it).

Decrease the verbosity

when errors are being written to stderr.

Increase the verbosity

when errors are being written to stderr.

Forwarding of arbitrary TCP connections over a secure channel can be specified either on the command line or in a configuration file. One possible application of TCP forwarding is a secure connection to a mail server; another is going through firewalls.

In the example below, we look at encrypting communication for an IRC client, even though the IRC server it connects to does not directly support encrypted communication. This works as follows: the user connects to the remote host using

specifying the ports to be used to forward the connection. After that it is possible to start the program locally, and

will encrypt and forward the connection to the remote server.

The following example tunnels an IRC session from the client to an IRC server at

joining channel

nickname

using the standard IRC port, 6667:

$ ssh -f -L 6667:localhost:6667 server.example.com sleep 10 $ irc -c ’#users’ pinky IRC/127.0.0.1

The

option backgrounds

and the remote command

is specified to allow an amount of time (10 seconds, in the example) to start the program which is going to use the tunnel. If no connections are made within the time specified,

will exit.

If the

variable is set to

(or see the description of the

and

options above) and the user is using X11 (the

environment variable is set), the connection to the X11 display is automatically forwarded to the remote side in such a way that any X11 programs started from the shell (or command) will go through the encrypted channel, and the connection to the real X server will be made from the local machine. The user should not manually set

Forwarding of X11 connections can be configured on the command line or in configuration files.

The

value set by

will point to the server machine, but with a display number greater than zero. This is normal, and happens because

creates a

X server on the server machine for forwarding the connections over the encrypted channel.

will also automatically set up Xauthority data on the server machine. For this purpose, it will generate a random authorization cookie, store it in Xauthority on the server, and verify that any forwarded connections carry this cookie and replace it by the real cookie when the connection is opened. The real authentication cookie is never sent to the server machine (and no cookies are sent in the plain).

If the

variable is set to

(or see the description of the

and

options above) and the user is using an authentication agent, the connection to the agent is automatically forwarded to the remote side.

When connecting to a server for the first time, a fingerprint of the server’s public key is presented to the user (unless the option

has been disabled). Fingerprints can be determined using

If the fingerprint is already known, it can be matched and the key can be accepted or rejected. If only legacy (MD5) fingerprints for the server are available, the

option may be used to downgrade the fingerprint algorithm to match.

Because of the difficulty of comparing host keys just by looking at fingerprint strings, there is also support to compare host keys visually, using

By setting the

option to

a small ASCII graphic gets displayed on every login to a server, no matter if the session itself is interactive or not. By learning the pattern a known server produces, a user can easily find out that the host key has changed when a completely different pattern is displayed. Because these patterns are not unambiguous however, a pattern that looks similar to the pattern remembered only gives a good probability that the host key is the same, not guaranteed proof.

To get a listing of the fingerprints along with their random art for all known hosts, the following command line can be used:

If the fingerprint is unknown, an alternative method of verification is available: SSH fingerprints verified by DNS. An additional resource record (RR), SSHFP, is added to a zonefile and the connecting client is able to match the fingerprint with that of the key presented.

In this example, we are connecting a client to a server,

The SSHFP resource records should first be added to the zonefile for host.example.com:

$ ssh-keygen -r host.example.com.

The output lines will have to be added to the zonefile. To check that the zone is answering fingerprint queries:

Finally the client connects:

$ ssh -o “VerifyHostKeyDNS ask” host.example.com […] Matching host key fingerprint found in DNS. Are you sure you want to continue connecting (yes/no)?

See the

option in

for more information.

contains support for Virtual Private Network (VPN) tunnelling using the

network pseudo-device, allowing two networks to be joined securely. The

configuration option

controls whether the server supports this, and at what level (layer 2 or 3 traffic).

The following example would connect client network 10.0.50.0/24 with remote network 10.0.99.0/24 using a point-to-point connection from 10.1.1.1 to 10.1.1.2, provided that the SSH server running on the gateway to the remote network, at 192.168.1.15, allows it.

On the client:

netmask 255.255.255.252 # route add 10.0.99.0/24 10.1.1.2

On the server:

10.0.50.0/24 10.1.1.1

Client access may be more finely tuned via the

file (see below) and the

server option. The following entry would permit connections on

device 1 from user

and on tun device 2 from user

if

is set to

tunnel=“1”,command=“sh /etc/netstart tun1” ssh-rsa … jane tunnel=“2”,command=“sh /etc/netstart tun2” ssh-rsa … john

Since an SSH-based setup entails a fair amount of overhead, it may be more suited to temporary setups, such as for wireless VPNs. More permanent VPNs are better provided by tools such as

and

will normally set the following environment variables:

The

variable indicates the location of the X11 server. It is automatically set by

to point to a value of the form

where

indicates the host where the shell runs, and

is an integer 1.

uses this special value to forward X11 connections over the secure channel. The user should normally not set

explicitly, as that will render the X11 connection insecure (and will require the user to manually copy any required authorization cookies).

Set to the path of the user’s home directory.

Synonym for

set for compatibility with systems that use this variable.

Set to the path of the user’s mailbox.

Set to the default

as specified when compiling

If

needs a passphrase, it will read the passphrase from the current terminal if it was run from a terminal. If

does not have a terminal associated with it but

and

are set, it will execute the program specified by

and open an X11 window to read the passphrase. This is particularly useful when calling

from a

or related script. (Note that on some machines it may be necessary to redirect the input from

to make this work.)

Allows further control over the use of an askpass program. If this variable is set to

then

will never attempt to use one. If it is set to

then

will prefer to use the askpass program instead of the TTY when requesting passwords. Finally, if the variable is set to

then the askpass program will be used for all passphrase input regardless of whether

is set.

Identifies the path of a

socket used to communicate with the agent.

Identifies the client and server ends of the connection. The variable contains four space-separated values: client IP address, client port number, server IP address, and server port number.

This variable contains the original command line if a forced command is executed. It can be used to extract the original arguments.

This is set to the name of the tty (path to the device) associated with the current shell or command. If the current session has no tty, this variable is not set.

Optionally set by

to contain the interface names assigned if tunnel forwarding was requested by the client.

Optionally set by

this variable may contain a pathname to a file that lists the authentication methods successfully used when the session was established, including any public keys that were used.

This variable is set to indicate the present time zone if it was set when the daemon was started (i.e. the daemon passes the value on to new connections).

Set to the name of the user logging in.

Additionally,

reads

and adds lines of the format

to the environment if the file exists and users are allowed to change their environment. For more information, see the

option in

This file is used for host-based authentication (see above). On some machines this file may need to be world-readable if the user’s home directory is on an NFS partition, because

reads it as root. Additionally, this file must be owned by the user, and must not have write permissions for anyone else. The recommended permission for most machines is read/write for the user, and not accessible by others.

This file is used in exactly the same way as

but allows host-based authentication without permitting login with rlogin/rsh.

This directory is the default location for all user-specific configuration and authentication information. There is no general requirement to keep the entire contents of this directory secret, but the recommended permissions are read/write/execute for the user, and not accessible by others.

Lists the public keys (DSA, ECDSA, Ed25519, RSA) that can be used for logging in as this user. The format of this file is described in the

manual page. This file is not highly sensitive, but the recommended permissions are read/write for the user, and not accessible by others.

This is the per-user configuration file. The file format and configuration options are described in

Because of the potential for abuse, this file must have strict permissions: read/write for the user, and not writable by others.

Contains additional definitions for environment variables; see

above.

Contains the private key for authentication. These files contain sensitive data and should be readable by the user but not accessible by others (read/write/execute).

will simply ignore a private key file if it is accessible by others. It is possible to specify a passphrase when generating the key which will be used to encrypt the sensitive part of this file using AES-128.

Contains the public key for authentication. These files are not sensitive and can (but need not) be readable by anyone.

Contains a list of host keys for all hosts the user has logged into that are not already in the systemwide list of known host keys. See

for further details of the format of this file.

Commands in this file are executed by

when the user logs in, just before the user’s shell (or command) is started. See the

manual page for more information.

This file is for host-based authentication (see above). It should only be writable by root.

This file is used in exactly the same way as

but allows host-based authentication without permitting login with rlogin/rsh.

Systemwide configuration file. The file format and configuration options are described in

These files contain the private parts of the host keys and are used for host-based authentication.

Systemwide list of known host keys. This file should be prepared by the system administrator to contain the public host keys of all machines in the organization. It should be world-readable. See

for further details of the format of this file.

Commands in this file are executed by

when the user logs in, just before the user’s shell (or command) is started. See the

manual page for more information.

exits with the exit status of the remote command or with 255 if an error occurred.

OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt and Dug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0.

Author: dt

Created: 2022-02-22 Tue 17:08