Man1 - potrace.1

-h, –help

print help message and exit.

-v, –version

print version info and exit. This also shows the defaults that were compiled into this version of potrace.

-l, –license

print license info and exit.

filename

Each file can hold an input image, or multiple concatenated input images. If filename arguments are given, then potrace will by default create one output file for each input filename given. The name of the output file is obtained from the input filename by changing its suffix according to the chosen backend. If changing the suffix is impossible because the names of the input and output files would be identical, then the output filename is created by adding the “-out” suffix to the name of the input file. If no filename arguments are given, then potrace acts as a filter, reading from standard input and writing to standard output. A filename of “-” may be given to specify reading from standard input.

-o filename, –output filename

write output to this file. All output is directed to the specified file. If this option is used, then multiple input filenames are only allowed for multi-page backends (see BACKEND TYPES below). In this case, each input file may contain one or more bitmaps, and all the bitmaps from all the input files are processed and the output concatenated into a single file. A filename of “-” may be given to specify writing to standard output.

--

End of options. Any remaining arguments are interpreted as filenames. This also disables filter mode, even if no filenames are given. This is useful for shell scripts, because potrace – $FILENAMES will behave correctly even for an empty list of filenames. However, -- with an empty list of filenames is not permitted in conjunction with the -o option, because this would generate a document of zero pages, which none of the backends permit.

For general information, see also BACKEND TYPES below.

-b name, –backend name

Select backend by name, where name is one of eps, postscript, ps, pdf, pdfpage, svg, dxf, geojson, pgm, gimppath, xfig. Backend names can be abbreviated by a prefix as long as it is unambiguous. Backend names are case insensitive.

-s, –svg, -b svg, –backend svg

SVG backend. The output is a Scalable Vector Graphics (SVG) file. This is a single-page, variable-sized, dimension-based backend. Note that unless the -r option is given, the resolution of the input bitmap is assumed to be 72dpi.

-b pdf, –backend pdf

PDF backend. The output is a file in the Portable Document Format. If the input consists of multiple bitmaps, they are each rendered on a separate page. This is a multi-page, variable-sized, dimension-based backend.

-b pdfpage, –backend pdfpage

The PDFPage backend is like the PDF backend, except that it is fixed-size like the PostScript backend.

-e, –eps, -b eps, –backend eps

EPS backend (default). The output is an encapsulated PostScript file. This is a single-page, variable-sized, dimension-based backend.

-p, –postscript, -b ps, –backend ps

PostScript backend. The output is a PostScript file. This is a multi-page, fixed-size, dimension-based backend. If the input consists of multiple bitmaps, they are each rendered on a separate page.

-b dxf, –backend dxf

DXF backend. The output is a file in the Drawing Interchange Format (DXF). In this backend, all Bezier curves are approximated by piecewise circular arcs; this is suitable for processing in CAD software or for machining applications using CNC tools. This is a single-page, variable-sized, pixel-based backend. The -u option has no effect for this backend.

-b geojson, –backend geojson

GeoJSON backend. The output is a file in the format used by some applications processing geographical data. In this backend, all Bezier curves are approximated by 8 straight line segments. This is a single-page, variable-sized, pixel-based backend. The -u option has no effect for this backend.

-g, –pgm, -b pgm, –backend pgm

PGM backend. The output is a portable greymap (PGM) file. It is a convenient backend for antialiasing a bitmap image. This is a multi-page, variable-sized, pixel-based backend. If the input consists of more than one image, the images are concatenated in the output.

-b gimppath, –backend gimppath

Gimppath backend. This backend produces output suitable to be imported as a path by the GNU Image Manipulation Program (Gimp) (in the Layers, Channels & Paths dialog, select Paths, then right-click and select Import Path). The output is actually an SVG file. The differences to the SVG backend are: the –opaque option has no effect, the –flat option is always on, and the dimensions are pixel-based. This is a single-page, variable-sized, pixel-based backend.

-b xfig, –backend xfig

XFig backend. This is a single-page, fixed-size, dimension-based backend. The output is a file in the XFig format. Note that XFig uses X-splines instead of Bezier curves, thus it is not possible to translate the output of potrace into the XFig format with absolute accuracy. This backend does a reasonable approximation using two control points for each Bezier curve segment. The -u option has no effect for this backend, because control points are always rounded to the nearest 1/1200 of an inch in XFig. Curve optimization is disabled. Implies –opaque.

For more detailed information on these options, see TECHNICAL DOCUMENTATION below.

-z policy, –turnpolicy policy

specify how to resolve ambiguities in path decomposition. Must be one of black, white, right, left, minority, majority, or random. Default is minority. Turn policies can be abbreviated by an unambiguous prefix, e.g., one can specify min instead of minority.

-t n, –turdsize n

suppress speckles of up to this many pixels.

-a n, –alphamax n

set the corner threshold parameter. The default value is 1. The smaller this value, the more sharp corners will be produced. If this parameter is 0, then no smoothing will be performed and the output is a polygon. If this parameter is greater than 4/3, then all corners are suppressed and the output is completely smooth.

-n, –longcurve

turn off curve optimization. Normally potrace tries to join adjacent Bezier curve segments when this is possible. This option disables this behavior, resulting in a larger file size.

-O n, –opttolerance n

set the curve optimization tolerance. The default value is 0.2. Larger values allow more consecutive Bezier curve segments to be joined together in a single segment, at the expense of accuracy.

-u n, –unit n

set output quantization. Coordinates in the output are rounded to 1/unit pixels. The default of 10 usually gives good results. For some of the debug modes, a value of 100 gives more accurate output. This option has no effect for the XFig backend, which always rasterizes to 1/1200 inch, or for the DXF backend. For the GeoJSON backend, this option is only a hint; the actual rounding may be more, but not less, accurate than specified.

-d n, –debug n

produce debugging output of type n. This has different effects for different backends. For the PostScript/EPS backends, the values n=1,2,3 illustrate the intermediate stages of the potrace algorithm.

-P format, –pagesize format

for fixed-size backends, set page size. The following formats can be specified: A4, A3, A5, B5, Letter, Legal, Tabloid, Statement, Executive, Folio, Quarto, 10x14. Format names are case insensitive. Also, an argument of the form dim/x/dim is accepted to specify arbitrary dimensions. The default page size is Letter (or A4, if this was configured at compile time, see COMPILE TIME CONFIGURATION below). Page format names can be abbreviated by a prefix as long as it is unambiguous. This option has no effect for variable-sized backends.

-W dim, –width dim

set the width of output image (before any rotation and margins). If only one of width and height is specified, the other is adjusted accordingly so that the aspect ratio is preserved.

-H dim, –height dim

set the height of output image. See -W for details.

-r n[x/n/], –resolution n[x/n/]

for dimension-based backends, set the resolution (in dpi). One inch in the output image corresponds to this many pixels in the input. Note that a larger value results in a smaller output image. It is possible to specify separate resolutions in the x and y directions by giving an argument of the form n/x/n. For variable-sized backends, the default resolution is 72dpi. For fixed-size backends, there is no default resolution; the image is by default scaled to fit on the page. This option has no effect for pixel-based backends. If -W or -H are specified, they take precedence.

-x n[x/n/], –scale n[x/n/]

for pixel-based backends, set the scaling factor. A value greater than 1 enlarges the output, a value between 0 and 1 makes the output smaller. The default is 1. It is possible to specify separate scaling factors for the x and y directions by giving an argument of the form n/x/n. This option has no effect for dimension-based backends. If -W or -H are specified, they take precedence.

-S n, –stretch n

set the aspect ratio. A value greater than 1 means the image will be stretched in the y direction. A value between 0 and 1 means the image will be compressed in the y direction.

-A angle, –rotate angle

set the rotation angle (in degrees). The output will be rotated counterclockwise by this angle. This is useful for compensating for images that were scanned not quite upright.

-M dim, –margin dim

set all four margins. The effect and default value of this option depend on the backend. For variable-sized backends, the margins will simply be added around the output image (or subtracted, in case of negative margins). The default margin for these backends is 0. For fixed-size backends, the margin settings can be used to control the placement of the image on the page. If only one of the left and right margin is given, the image will be placed this distance from the respective edge of the page, and similarly for top and bottom. If margins are given on opposite sides, the image is scaled to fit between these margins, unless the scaling is already determined explicitly by one or more of the -W, -H, -r, or -x options. By default, fixed-size backends use a non-zero margin whose width depends on the page size.

-L dim, –leftmargin dim

set the left margin. See -M for details.

-R dim, –rightmargin dim

set the right margin. See -M for details.

-T dim, –topmargin dim

set the top margin. See -M for details.

-B dim, –bottommargin dim

set the bottom margin. See -M for details.

–tight

remove whitespace around the image before scaling and margins are applied. If this option is given, calculations of the width, height, and margins are based on the actual vector outline, rather than on the outer dimensions of the input pixmap, which is the default. In particular, the –tight option can be used to remove any existing margins from the input image. See the file placement.pdf for a more detailed illustration.

These options are only supported by certain backends. The DXF and GeoJSON backends do not support color.

-C #rrggbb, –color #rrggbb

set the foreground color of the output image. The default is black.

–fillcolor #rrggbb

set the fill color of the output image, i.e., the color of the “white” parts that are enclosed by “black” parts. The default is to leave these parts transparent. Implies –opaque. Please note that this option sets the background color; to set the foreground color, use –color instead.

–opaque

fill in the white parts of the image opaquely, instead of leaving them transparent. This only applies to interior white parts, i.e., those that are enclosed inside a black outline. Opaqueness is always in effect for the XFig backend.

–group

for SVG output, try to group related paths together. Each path is grouped together with all paths that are contained inside it, so that they can be moved around as a unit with an SVG editor. This makes coloring individual components slightly more cumbersome, and thus it is not the default.

–flat

for SVG output, put the entire image into a single path. This makes it impossible to color the components individually, and thus it is not the default. But the resulting SVG file can be more easily imported by some applications such as Gimp. In fact, the Gimppath backend is a variation of the SVG backend with the –flat option and pixel-based scaling. The –flat option has no effect if –opaque has been selected.

-c, –cleartext

do not compress the output. This option disables the use of compression filters in the PostScript and PDF output. In the PostScript backend, if -c and -q are used together, the resulting output can be easily read by other programs or even by humans.

-2, –level2

use PostScript level 2 compression (default). The resulting file size is ca. 40% smaller than if the -c option is used.

-3, –level3

use PostScript level 3 compression, if available. This gives slightly smaller files than using -2, but the resulting files may not print on older PostScript level 2 printers. If support for PostScript level 3 compression has been disabled at compile time, a warning message is printed and level 2 compression is used instead.

-q, –longcoding

turn off optimized numerical coding in PostScript output. Normally, potrace uses a very compact numerical format to represent Bezier curves in PostScript, taking advantage of existing redundancy in the curve parameters. This option disables this behavior, resulting in longer, but more readable output (particularly if the -c option is also used).

-G n, –gamma n

set the gamma value for anti-aliasing (default is 2.2). Most computer displays do not render shades of grey linearly, i.e., a grey value of 0.5 is not displayed as being exactly half-way between black and white. The gamma parameter corrects for this, and therefore leads to nicer looking output. The default value of 2.2 is appropriate for most normal CRT displays.

-k n, –blacklevel n

set the threshold level for converting input images to bitmaps. The potrace algorithm expects a bitmap, thus all pixels of the input images are converted to black or white before processing begins. Pixels whose brightness is less than n are converted to black, all other pixels to white. Here n is a number between 0 and 1. One case is treated specially: if the input is in an indexed color format with exactly 2 colors, then the blacklevel is ignored and the darker of the two colors is mapped to black.

Note: the method used by potrace for converting greymaps to bitmaps is very crude; much better results can be obtained if a separate program, such as mkbitmap*(1), is used for this purpose. In particular, *mkbitmap*(1), which is distributed with *potrace, has the ability to scale and interpolate the image before thresholding, which results in much better preservation of detail.

-i, –invert

invert the input bitmap before processing.

–progress

display a progress bar for each bitmap that is processed. This is useful for interactive use. The default behavior is not to show any progress information.

–tty mode

set the terminal mode for progress bar rendering. Possible values are “vt100”, which requires a vt100-compatible terminal, and “dumb”, which uses only ASCII characters. The default is system dependent.