Man1 - perlreftut.1perl

perlreftut - Mark’s very short tutorial about references

One of the most important new features in Perl 5 was the capability to manage complicated data structures like multidimensional arrays and nested hashes. To enable these, Perl 5 introduced a feature called references, and using references is the key to managing complicated, structured data in Perl. Unfortunately, there’s a lot of funny syntax to learn, and the main manual page can be hard to follow. The manual is quite complete, and sometimes people find that a problem, because it can be hard to tell what is important and what isn’t.

Fortunately, you only need to know 10% of what’s in the main page to get 90% of the benefit. This page will show you that 10%.

One problem that comes up all the time is needing a hash whose values are lists. Perl has hashes, of course, but the values have to be scalars; they can’t be lists.

Why would you want a hash of lists? Let’s take a simple example: You have a file of city and country names, like this:

Chicago, USA Frankfurt, Germany Berlin, Germany Washington, USA Helsinki, Finland New York, USA

and you want to produce an output like this, with each country mentioned once, and then an alphabetical list of the cities in that country:

Finland: Helsinki. Germany: Berlin, Frankfurt. USA: Chicago, New York, Washington.

The natural way to do this is to have a hash whose keys are country names. Associated with each country name key is a list of the cities in that country. Each time you read a line of input, split it into a country and a city, look up the list of cities already known to be in that country, and append the new city to the list. When you’re done reading the input, iterate over the hash as usual, sorting each list of cities before you print it out.

If hash values couldn’t be lists, you lose. You’d probably have to combine all the cities into a single string somehow, and then when time came to write the output, you’d have to break the string into a list, sort the list, and turn it back into a string. This is messy and error-prone. And it’s frustrating, because Perl already has perfectly good lists that would solve the problem if only you could use them.

By the time Perl 5 rolled around, we were already stuck with this design: Hash values must be scalars. The solution to this is references.

A reference is a scalar value that refers to an entire array or an entire hash (or to just about anything else). Names are one kind of reference that you’re already familiar with. Each human being is a messy, inconvenient collection of cells. But to refer to a particular human, for instance the first computer programmer, it isn’t necessary to describe each of their cells; all you need is the easy, convenient scalar string Ada Lovelace.

References in Perl are like names for arrays and hashes. They’re Perl’s private, internal names, so you can be sure they’re unambiguous. Unlike a human name, a reference only refers to one thing, and you always know what it refers to. If you have a reference to an array, you can recover the entire array from it. If you have a reference to a hash, you can recover the entire hash. But the reference is still an easy, compact scalar value.

You can’t have a hash whose values are arrays; hash values can only be scalars. We’re stuck with that. But a single reference can refer to an entire array, and references are scalars, so you can have a hash of references to arrays, and it’ll act a lot like a hash of arrays, and it’ll be just as useful as a hash of arrays.

We’ll come back to this city-country problem later, after we’ve seen some syntax for managing references.

There are just two ways to make a reference, and just two ways to use it once you have it.

Here’s the answer to the problem I posed earlier, of reformatting a file of city and country names.

1 my %table; 2 while (<>) { 3 chomp; 4 my ($city, $country) = split /, /; 5 $table{$country} = [] unless exists $table{$country}; 6 push @{$table{$country}}, $city; 7 } 8 for my $country (sort keys %table) { 9 print “$country: ”; 10 my @cities = @{$table{$country}}; 11 print join , , sort @cities; 12 print “.\n”; 13 }

The program has two pieces: Lines 2-7 read the input and build a data structure, and lines 8-13 analyze the data and print out the report. We’re going to have a hash, %table, whose keys are country names, and whose values are references to arrays of city names. The data structure will look like this:

%table -------—+ | | | --------------–—+ |Germany| *-—>| Frankfurt | Berlin | | | | --------------–—+ -------—+ | | | ---------- |Finland| *-—>| Helsinki | | | | ---------- -------—+ | | | ------------------------------- | USA | *-—>| Chicago | Washington | New York | | | | ------------------------------- -------—+

We’ll look at output first. Supposing we already have this structure, how do we print it out?

8 for my $country (sort keys %table) { 9 print “$country: ”; 10 my @cities = @{$table{$country}}; 11 print join , , sort @cities; 12 print “.\n”; 13 }

%table is an ordinary hash, and we get a list of keys from it, sort the keys, and loop over the keys as usual. The only use of references is in line 10. $table{$country} looks up the key $country in the hash and gets the value, which is a reference to an array of cities in that country. Use Rule 1 says that we can recover the array by saying @{$table{$country}}. Line 10 is just like

@cities = @array;

except that the name array has been replaced by the reference {$table{$country}}. The @ tells Perl to get the entire array. Having gotten the list of cities, we sort it, join it, and print it out as usual.

Lines 2-7 are responsible for building the structure in the first place. Here they are again:

2 while (<>) { 3 chomp; 4 my ($city, $country) = split /, /; 5 $table{$country} = [] unless exists $table{$country}; 6 push @{$table{$country}}, $city; 7 }

Lines 2-4 acquire a city and country name. Line 5 looks to see if the country is already present as a key in the hash. If it’s not, the program uses the [] notation (Make Rule 2) to manufacture a new, empty anonymous array of cities, and installs a reference to it into the hash under the appropriate key.

Line 6 installs the city name into the appropriate array. $table{$country} now holds a reference to the array of cities seen in that country so far. Line 6 is exactly like

push @array, $city;

except that the name array has been replaced by the reference {$table{$country}}. The push adds a city name to the end of the referred-to array.

There’s one fine point I skipped. Line 5 is unnecessary, and we can get rid of it.

2 while (<>) { 3 chomp; 4 my ($city, $country) = split /, /; 5 #### $table{$country} = [] unless exists $table{$country}; 6 push @{$table{$country}}, $city; 7 }

If there’s already an entry in %table for the current $country, then nothing is different. Line 6 will locate the value in $table{$country}, which is a reference to an array, and push $city into the array. But what does it do when $country holds a key, say Greece, that is not yet in %table?

This is Perl, so it does the exact right thing. It sees that you want to push Athens onto an array that doesn’t exist, so it helpfully makes a new, empty, anonymous array for you, installs it into %table, and then pushes Athens onto it. This is called autovivification–bringing things to life automatically. Perl saw that the key wasn’t in the hash, so it created a new hash entry automatically. Perl saw that you wanted to use the hash value as an array, so it created a new empty array and installed a reference to it in the hash automatically. And as usual, Perl made the array one element longer to hold the new city name.

I promised to give you 90% of the benefit with 10% of the details, and that means I left out 90% of the details. Now that you have an overview of the important parts, it should be easier to read the perlref manual page, which discusses 100% of the details.

Some of the highlights of perlref:

• You can make references to anything, including scalars, functions, and other references.
• In Use Rule 1, you can omit the curly brackets whenever the thing inside them is an atomic scalar variable like $aref. For example, @$aref is the same as @{$aref}, and $$aref[1] is the same as ${$aref}[1]. If you’re just starting out, you may want to adopt the habit of always including the curly brackets.
• This doesn’t copy the underlying array: $aref2 = $aref1; You get two references to the same array. If you modify $aref1->[23] and then look at $aref2->[23] you’ll see the change. To copy the array, use $aref2 = [@{$aref1}]; This uses [...] notation to create a new anonymous array, and $aref2 is assigned a reference to the new array. The new array is initialized with the contents of the array referred to by $aref1. Similarly, to copy an anonymous hash, you can use $href2 = {%{$href1}};
• To see if a variable contains a reference, use the ref function. It returns true if its argument is a reference. Actually it’s a little better than that: It returns HASH for hash references and ARRAY for array references.
• If you try to use a reference like a string, you get strings like ARRAY(0x80f5dec) or HASH(0x826afc0) If you ever see a string that looks like this, you’ll know you printed out a reference by mistake. A side effect of this representation is that you can use eq to see if two references refer to the same thing. (But you should usually use == instead because it’s much faster.)
• You can use a string as if it were a reference. If you use the string "foo" as an array reference, it’s taken to be a reference to the array @foo. This is called a symbolic reference. The declaration use strict refs disables this feature, which can cause all sorts of trouble if you use it by accident.

You might prefer to go on to perllol instead of perlref; it discusses lists of lists and multidimensional arrays in detail. After that, you should move on to perldsc; it’s a Data Structure Cookbook that shows recipes for using and printing out arrays of hashes, hashes of arrays, and other kinds of data.

Everyone needs compound data structures, and in Perl the way you get them is with references. There are four important rules for managing references: Two for making references and two for using them. Once you know these rules you can do most of the important things you need to do with references.

Author: Mark Jason Dominus, Plover Systems (mjd-perl-ref+@plover.com)

This article originally appeared in The Perl Journal ( http://www.tpj.com/ ) volume 3, #2. Reprinted with permission.

The original title was Understand References Today.