Man1 - perl5100delta.1perl

The feature pragma is used to enable new syntax that would break Perl’s backwards-compatibility with older releases of the language. It’s a lexical pragma, like strict or warnings.

Currently the following new features are available: switch (adds a switch statement), say (adds a say built-in function), and state (adds a state keyword for declaring static variables). Those features are described in their own sections of this document.

The feature pragma is also implicitly loaded when you require a minimal perl version (with the use VERSION construct) greater than, or equal to, 5.9.5. See feature for details.

-E is equivalent to -e, but it implicitly enables all optional features (like use feature ":5.10").

A new operator // (defined-or) has been implemented. The following expression:

$a // $b

is merely equivalent to

defined $a ? $a : $b

and the statement

$c //= $d;

can now be used instead of

$c = $d unless defined $c;

The // operator has the same precedence and associativity as ||. Special care has been taken to ensure that this operator Do What You Mean while not breaking old code, but some edge cases involving the empty regular expression may now parse differently. See perlop for details.

Perl 5 now has a switch statement. It’s available when use feature switch is in effect. This feature introduces three new keywords, given, when, and default:

given ($foo) { when (^abc) { $abc = 1; } when (^def) { $def = 1; } when (^xyz) { $xyz = 1; } default { $nothing = 1; } }

A more complete description of how Perl matches the switch variable against the when conditions is given in Switch statements in perlsyn.

This kind of match is called smart match, and it’s also possible to use it outside of switch statements, via the new ~~ operator. See Smart matching in detail in perlsyn.

This feature was contributed by Robin Houston.

Recursive Patterns

It is now possible to write recursive patterns without using the (??{}) construct. This new way is more efficient, and in many cases easier to read. Each capturing parenthesis can now be treated as an independent pattern that can be entered by using the (?PARNO) syntax (PARNO standing for parenthesis number). For example, the following pattern will match nested balanced angle brackets: / ^ # start of line ( # start capture buffer 1 < # match an opening angle bracket (?: # match one of: (?> # dont backtrack over the inside of this group [^<>]+ # one or more non angle brackets ) # end non backtracking group | # … or … (?1) # recurse to bracket 1 and try it again )* # 0 or more times. > # match a closing angle bracket ) # end capture buffer one $ # end of line /x PCRE users should note that Perl’s recursive regex feature allows backtracking into a recursed pattern, whereas in PCRE the recursion is atomic or possessive in nature. As in the example above, you can add (?>) to control this selectively. (Yves Orton)

Named Capture Buffers

It is now possible to name capturing parenthesis in a pattern and refer to the captured contents by name. The naming syntax is (?<NAME>....). It’s possible to backreference to a named buffer with the \k<NAME> syntax. In code, the new magical hashes %+ and %- can be used to access the contents of the capture buffers. Thus, to replace all doubled chars with a single copy, one could write s/(?<letter>.)\k<letter>/$+{letter}/g Only buffers with defined contents will be visible in the %+ hash, so it’s possible to do something like foreach my $name (keys %+) { print “content of buffer $name is $+{$name}\n”; } The %- hash is a bit more complete, since it will contain array refs holding values from all capture buffers similarly named, if there should be many of them. %+ and %- are implemented as tied hashes through the new module Tie::Hash::NamedCapture. Users exposed to the .NET regex engine will find that the perl implementation differs in that the numerical ordering of the buffers is sequential, and not unnamed first, then named. Thus in the pattern (A)(?<B>B)(C)(?<D>D) $1 will be ’A’, $2 will be ’B’, $3 will be ’C’ and $4 will be ’D’ and not $1 is ’A’, $2 is ’C’ and $3 is ’B’ and $4 is ’D’ that a .NET programmer would expect. This is considered a feature. :-) (Yves Orton)

Possessive Quantifiers

Perl now supports the possessive quantifier syntax of the atomic match pattern. Basically a possessive quantifier matches as much as it can and never gives any back. Thus it can be used to control backtracking. The syntax is similar to non-greedy matching, except instead of using a ’?’ as the modifier the ’+’ is used. Thus ?+, *+, ++, {min,max}+ are now legal quantifiers. (Yves Orton)

Backtracking control verbs

The regex engine now supports a number of special-purpose backtrack control verbs: (*THEN), (*PRUNE), (*MARK), (*SKIP), (*COMMIT), (*FAIL) and (*ACCEPT). See perlre for their descriptions. (Yves Orton)

Relative backreferences

A new syntax \g{N} or \gN where N is a decimal integer allows a safer form of back-reference notation as well as allowing relative backreferences. This should make it easier to generate and embed patterns that contain backreferences. See Capture buffers in perlre. (Yves Orton)

“\K” escape

The functionality of Jeff Pinyan’s module Regexp::Keep has been added to the core. In regular expressions you can now use the special escape \K as a way to do something like floating length positive lookbehind. It is also useful in substitutions like: s/(foo)bar/$1/g that can now be converted to s/foo\Kbar//g which is much more efficient. (Yves Orton)

Vertical and horizontal whitespace, and linebreak

Regular expressions now recognize the \v and \h escapes that match vertical and horizontal whitespace, respectively. \V and \H logically match their complements. \R matches a generic linebreak, that is, vertical whitespace, plus the multi-character sequence "\x0D\x0A".

Optional pre-match and post-match captures with the /p flag

There is a new flag /p for regular expressions. Using this makes the engine preserve a copy of the part of the matched string before the matching substring to the new special variable ${^PREMATCH}, the part after the matching substring to ${^POSTMATCH}, and the matched substring itself to ${^MATCH}. Perl is still able to store these substrings to the special variables $`, $, $&, but using these variables anywhere in the program adds a penalty to all regular expression matches, whereas if you use the /p flag and the new special variables instead, you pay only for the regular expressions where the flag is used. For more detail on the new variables, see perlvar; for the use of the regular expression flag, see perlop and perlre.

say() is a new built-in, only available when use feature say is in effect, that is similar to print(), but that implicitly appends a newline to the printed string. See say in perlfunc. (Robin Houston)

The default variable $_ can now be lexicalized, by declaring it like any other lexical variable, with a simple

my $_;

The operations that default on $_ will use the lexically-scoped version of $_ when it exists, instead of the global $_.

In a map or a grep block, if $_ was previously my’ed, then the $_ inside the block is lexical as well (and scoped to the block).

In a scope where $_ has been lexicalized, you can still have access to the global version of $_ by using $::_, or, more simply, by overriding the lexical declaration with our $_. (Rafael Garcia-Suarez)

A new prototype character has been added. _ is equivalent to $ but defaults to $_ if the corresponding argument isn’t supplied (both $ and _ denote a scalar). Due to the optional nature of the argument, you can only use it at the end of a prototype, or before a semicolon.

This has a small incompatible consequence: the prototype() function has been adjusted to return _ for some built-ins in appropriate cases (for example, prototype(CORE::rmdir)). (Rafael Garcia-Suarez)

UNITCHECK, a new special code block has been introduced, in addition to BEGIN, CHECK, INIT and END.

CHECK and INIT blocks, while useful for some specialized purposes, are always executed at the transition between the compilation and the execution of the main program, and thus are useless whenever code is loaded at runtime. On the other hand, UNITCHECK blocks are executed just after the unit which defined them has been compiled. See perlmod for more information. (Alex Gough)

A new pragma, mro (for Method Resolution Order) has been added. It permits to switch, on a per-class basis, the algorithm that perl uses to find inherited methods in case of a multiple inheritance hierarchy. The default MRO hasn’t changed (DFS, for Depth First Search). Another MRO is available: the C3 algorithm. See mro for more information. (Brandon Black)

Note that, due to changes in the implementation of class hierarchy search, code that used to undef the *ISA glob will most probably break. Anyway, undef’ing *ISA had the side-effect of removing the magic on the @ISA array and should not have been done in the first place. Also, the cache *::ISA::CACHE:: no longer exists; to force reset the @ISA cache, you now need to use the mro API, or more simply to assign to @ISA (e.g. with @ISA = @ISA).

The readdir() function may return a short filename when the long filename contains characters outside the ANSI codepage. Similarly Cwd::cwd() may return a short directory name, and glob() may return short names as well. On the NTFS file system these short names can always be represented in the ANSI codepage. This will not be true for all other file system drivers; e.g. the FAT filesystem stores short filenames in the OEM codepage, so some files on FAT volumes remain inaccessible through the ANSI APIs.

Similarly, $^X, @INC, and =$ENV={PATH} are preprocessed at startup to make sure all paths are valid in the ANSI codepage (if possible).

The Win32::GetLongPathName() function now returns the UTF-8 encoded correct long file name instead of using replacement characters to force the name into the ANSI codepage. The new Win32::GetANSIPathName() function can be used to turn a long pathname into a short one only if the long one cannot be represented in the ANSI codepage.

Many other functions in the Win32 module have been improved to accept UTF-8 encoded arguments. Please see Win32 for details.

The built-in function readpipe() is now overridable. Overriding it permits also to override its operator counterpart, qx// (a.k.a. ``). Moreover, it now defaults to $_ if no argument is provided. (Rafael Garcia-Suarez)

readline() now defaults to *ARGV if no argument is provided. (Rafael Garcia-Suarez)

A new class of variables has been introduced. State variables are similar to my variables, but are declared with the state keyword in place of my. They’re visible only in their lexical scope, but their value is persistent: unlike my variables, they’re not undefined at scope entry, but retain their previous value. (Rafael Garcia-Suarez, Nicholas Clark)

To use state variables, one needs to enable them by using

use feature state;

or by using the -E command-line switch in one-liners. See Persistent Private Variables in perlsub.

As a new form of syntactic sugar, it’s now possible to stack up filetest operators. You can now write -f -w -x $file in a row to mean -x $file && -w _ && -f _. See -X in perlfunc.

The UNIVERSAL class has a new method, DOES(). It has been added to solve semantic problems with the isa() method. isa() checks for inheritance, while DOES() has been designed to be overridden when module authors use other types of relations between classes (in addition to inheritance). (chromatic)

See $obj->DOES( ROLE ) in UNIVERSAL.

Formats were improved in several ways. A new field, ^*, can be used for variable-width, one-line-at-a-time text. Null characters are now handled correctly in picture lines. Using @# and ~~ together will now produce a compile-time error, as those format fields are incompatible. perlform has been improved, and miscellaneous bugs fixed.

There are two new byte-order modifiers, > (big-endian) and < (little-endian), that can be appended to most pack() and unpack() template characters and groups to force a certain byte-order for that type or group. See pack in perlfunc and perlpacktut for details.

You can now use no followed by a version number to specify that you want to use a version of perl older than the specified one.

chdir, chmod and chown can now work on filehandles as well as filenames, if the system supports respectively fchdir, fchmod and fchown, thanks to a patch provided by Gisle Aas.

$( and $) now return groups in the order where the OS returns them, thanks to Gisle Aas. This wasn’t previously the case.

You can now use recursive subroutines with sort(), thanks to Robin Houston.

The constant folding routine is now wrapped in an exception handler, and if folding throws an exception (such as attempting to evaluate 0/0), perl now retains the current optree, rather than aborting the whole program. Without this change, programs would not compile if they had expressions that happened to generate exceptions, even though those expressions were in code that could never be reached at runtime. (Nicholas Clark, Dave Mitchell)

It’s possible to enhance the mechanism of subroutine hooks in @INC by adding a source filter on top of the filehandle opened and returned by the hook. This feature was planned a long time ago, but wasn’t quite working until now. See require in perlfunc for details. (Nicholas Clark)

“${^RE_DEBUG_FLAGS}”

This variable controls what debug flags are in effect for the regular expression engine when running under use re "debug". See re for details.

“${^CHILD_ERROR_NATIVE}”

This variable gives the native status returned by the last pipe close, backtick command, successful call to wait() or waitpid(), or from the system() operator. See perlvar for details. (Contributed by Gisle Aas.)

“${^RE_TRIE_MAXBUF}”

See Trie optimisation of literal string alternations.

“${^WIN32_SLOPPY_STAT}”

See Sloppy stat on Windows.

unpack() now defaults to unpacking the $_ variable.

mkdir() without arguments now defaults to $_.

The internal dump output has been improved, so that non-printable characters such as newline and backspace are output in \x notation, rather than octal.

The -C option can no longer be used on the #! line. It wasn’t working there anyway, since the standard streams are already set up at this point in the execution of the perl interpreter. You can use binmode() instead to get the desired behaviour.

The copy of the Unicode Character Database included in Perl 5 has been updated to version 5.0.0.

MAD, which stands for Miscellaneous Attribute Decoration, is a still-in-development work leading to a Perl 5 to Perl 6 converter. To enable it, it’s necessary to pass the argument -Dmad to Configure. The obtained perl isn’t binary compatible with a regular perl 5.10, and has space and speed penalties; moreover not all regression tests still pass with it. (Larry Wall, Nicholas Clark)

On Windows platforms, kill(-9, $pid) now kills a process tree. (On Unix, this delivers the signal to all processes in the same process group.)

The semantics of pack() and unpack() regarding UTF-8-encoded data has been changed. Processing is now by default character per character instead of byte per byte on the underlying encoding. Notably, code that used things like pack("a*", $string) to see through the encoding of string will now simply get back the original $string. Packed strings can also get upgraded during processing when you store upgraded characters. You can get the old behaviour by using use bytes.

To be consistent with pack(), the C0 in unpack() templates indicates that the data is to be processed in character mode, i.e. character by character; on the contrary, U0 in unpack() indicates UTF-8 mode, where the packed string is processed in its UTF-8-encoded Unicode form on a byte by byte basis. This is reversed with regard to perl 5.8.X, but now consistent between pack() and unpack().

Moreover, C0 and U0 can also be used in pack() templates to specify respectively character and byte modes.

C0 and U0 in the middle of a pack or unpack format now switch to the specified encoding mode, honoring parens grouping. Previously, parens were ignored.

Also, there is a new pack() character format, W, which is intended to replace the old C. C is kept for unsigned chars coded as bytes in the strings internal representation. W represents unsigned (logical) character values, which can be greater than 255. It is therefore more robust when dealing with potentially UTF-8-encoded data (as C will wrap values outside the range 0..255, and not respect the string encoding).

In practice, that means that pack formats are now encoding-neutral, except C.

For consistency, A in unpack() format now trims all Unicode whitespace from the end of the string. Before perl 5.9.2, it used to strip only the classical ASCII space characters.

A new unpack() template character, ".", returns the number of bytes or characters (depending on the selected encoding mode, see above) read so far.

$*, which was deprecated in favor of the /s and /m regexp modifiers, has been removed.

The deprecated $# variable (output format for numbers) has been removed.

Two new severe warnings, $#/$* is no longer supported, have been added.

The lvalues returned by the three argument form of substr() used to be a fixed length window on the original string. In some cases this could cause surprising action at distance or other undefined behaviour. Now the length of the window adjusts itself to the length of the string assigned to it.

The identifier _ is now forced to be a bareword after a filetest operator. This solves a number of misparsing issues when a global _ subroutine is defined.

The :unique attribute has been made a no-op, since its current implementation was fundamentally flawed and not threadsafe.

The compile-time value of the %^H hint variable can now propagate into eval(“”)uated code. This makes it more useful to implement lexical pragmas.

As a side-effect of this, the overloaded-ness of constants now propagates into eval(“”).

A bareword argument to chdir() is now recognized as a file handle. Earlier releases interpreted the bareword as a directory name. (Gisle Aas)

An old feature of perl was that before require or use look for a file with a .pm extension, they will first look for a similar filename with a .pmc extension. If this file is found, it will be loaded in place of any potentially existing file ending in a .pm extension.

Previously, .pmc files were loaded only if more recent than the matching .pm file. Starting with 5.9.4, they’ll be always loaded if they exist.

\(^V can still be used with the =%vd= format in printf, but any character-level operations will now access the string representation of the =version= object and not the ordinals of a v-string. Expressions like =substr(\)^V, 0, 2)= or split //, $^V no longer work and must be rewritten.

The special arrays @- and @+ are no longer interpolated in regular expressions. (Sadahiro Tomoyuki)

If you call a subroutine by a tainted name, and if it defers to an AUTOLOAD function, then $AUTOLOAD will be (correctly) tainted. (Rick Delaney)

When perl is run under taint mode, printf() and sprintf() will now reject any tainted format argument. (Rafael Garcia-Suarez)

Undefining or deleting a signal handler via undef $SIG{FOO} is now equivalent to setting it to DEFAULT. (Rafael Garcia-Suarez)

use strict refs was ignoring taking a hard reference in an argument to defined(), as in :

use strict refs; my $x = foo; if (defined $$x) {…}

This now correctly produces the run-time error Cant use string as a SCALAR ref while “strict refs” in use.

defined @$foo and defined %$bar are now also subject to strict refs (that is, $foo and $bar shall be proper references there.) (defined(@foo) and defined(%bar) are discouraged constructs anyway.) (Nicholas Clark)

The regular expression construct (?p{}), which was deprecated in perl 5.8, has been removed. Use (??{}) instead. (Rafael Garcia-Suarez)

Support for pseudo-hashes has been removed from Perl 5.9. (The fields pragma remains here, but uses an alternate implementation.)

perlcc, the byteloader and the supporting modules (B::C, B::CC, B::Bytecode, etc.) are no longer distributed with the perl sources. Those experimental tools have never worked reliably, and, due to the lack of volunteers to keep them in line with the perl interpreter developments, it was decided to remove them instead of shipping a broken version of those. The last version of those modules can be found with perl 5.9.4.

However the B compiler framework stays supported in the perl core, as with the more useful modules it has permitted (among others, B::Deparse and B::Concise).

The JPL (Java-Perl Lingo) has been removed from the perl sources tarball.

Perl will now immediately throw an exception if you modify any package’s @ISA in such a way that it would cause recursive inheritance.

Previously, the exception would not occur until Perl attempted to make use of the recursive inheritance while resolving a method or doing a $foo->isa($bar) lookup.

modules The behaviour in 5.10.x favors the person using the module; The behaviour in 5.8.x favors the module writer;

Assume the following code:

main calls Foo::Bar::baz() Foo::Bar inherits from Foo::Base Foo::Bar::baz() calls Foo::Base::_bazbaz() Foo::Base::_bazbaz() calls: warnings::warnif(substr, some warning message);

On 5.8.x, the code warns when Foo::Bar contains use warnings; It does not matter if Foo::Base or main have warnings enabled to disable the warning one has to modify Foo::Bar.

On 5.10.0 and newer, the code warns when main contains use warnings; It does not matter if Foo::Base or Foo::Bar have warnings enabled to disable the warning one has to modify main.

Even more core modules are now also available separately through the CPAN. If you wish to update one of these modules, you don’t need to wait for a new perl release. From within the cpan shell, running the ’r’ command will report on modules with upgrades available. See perldoc CPAN for more information.

“feature”

The new pragma feature is used to enable new features that might break old code. See “The feature pragma” above.

“mro”

This new pragma enables to change the algorithm used to resolve inherited methods. See “New Pragma, mro” above.

Scoping of the “sort” pragma

The sort pragma is now lexically scoped. Its effect used to be global.

Scoping of “bignum”, “bigint”, “bigrat”

The three numeric pragmas bignum, bigint and bigrat are now lexically scoped. (Tels)

“base”

The base pragma now warns if a class tries to inherit from itself. (Curtis Ovid Poe)

“strict” and “warnings”

strict and warnings will now complain loudly if they are loaded via incorrect casing (as in use Strict;). (Johan Vromans)

“version”

The version module provides support for version objects.

“warnings”

The warnings pragma doesn’t load Carp anymore. That means that code that used Carp routines without having loaded it at compile time might need to be adjusted; typically, the following (faulty) code won’t work anymore, and will require parentheses to be added after the function name: use warnings; require Carp; Carp::confess argh;

“less”

less now does something useful (or at least it tries to). In fact, it has been turned into a lexical pragma. So, in your modules, you can now test whether your users have requested to use less CPU, or less memory, less magic, or maybe even less fat. See less for more. (Joshua ben Jore)

• encoding::warnings, by Audrey Tang, is a module to emit warnings whenever an ASCII character string containing high-bit bytes is implicitly converted into UTF-8. It’s a lexical pragma since Perl 5.9.4; on older perls, its effect is global.
• Module::CoreList, by Richard Clamp, is a small handy module that tells you what versions of core modules ship with any versions of Perl 5. It comes with a command-line frontend, corelist.
• Math::BigInt::FastCalc is an XS-enabled, and thus faster, version of Math::BigInt::Calc.
• Compress::Zlib is an interface to the zlib compression library. It comes with a bundled version of zlib, so having a working zlib is not a prerequisite to install it. It’s used by Archive::Tar (see below).
• IO::Zlib is an IO::-style interface to Compress::Zlib.
• Archive::Tar is a module to manipulate tar archives.
• Digest::SHA is a module used to calculate many types of SHA digests, has been included for SHA support in the CPAN module.
• ExtUtils::CBuilder and ExtUtils::ParseXS have been added.
• Hash::Util::FieldHash, by Anno Siegel, has been added. This module provides support for field hashes: hashes that maintain an association of a reference with a value, in a thread-safe garbage-collected way. Such hashes are useful to implement inside-out objects.
• Module::Build, by Ken Williams, has been added. It’s an alternative to ExtUtils::MakeMaker to build and install perl modules.
• Module::Load, by Jos Boumans, has been added. It provides a single interface to load Perl modules and .pl files.
• Module::Loaded, by Jos Boumans, has been added. It’s used to mark modules as loaded or unloaded.
• Package::Constants, by Jos Boumans, has been added. It’s a simple helper to list all constants declared in a given package.
• Win32API::File, by Tye McQueen, has been added (for Windows builds). This module provides low-level access to Win32 system API calls for files/dirs.
• Locale::Maketext::Simple, needed by CPANPLUS, is a simple wrapper around Locale::Maketext::Lexicon. Note that Locale::Maketext::Lexicon isn’t included in the perl core; the behaviour of Locale::Maketext::Simple gracefully degrades when the later isn’t present.
• Params::Check implements a generic input parsing/checking mechanism. It is used by CPANPLUS.
• Term::UI simplifies the task to ask questions at a terminal prompt.
• Object::Accessor provides an interface to create per-object accessors.
• Module::Pluggable is a simple framework to create modules that accept pluggable sub-modules.
• Module::Load::Conditional provides simple ways to query and possibly load installed modules.
• Time::Piece provides an object oriented interface to time functions, overriding the built-ins localtime() and gmtime().
• IPC::Cmd helps to find and run external commands, possibly interactively.
• File::Fetch provide a simple generic file fetching mechanism.
• Log::Message and Log::Message::Simple are used by the log facility of CPANPLUS.
• Archive::Extract is a generic archive extraction mechanism for .tar (plain, gzipped or bzipped) or .zip files.
• CPANPLUS provides an API and a command-line tool to access the CPAN mirrors.
• Pod::Escapes provides utilities that are useful in decoding Pod E<…> sequences.
• Pod::Simple is now the backend for several of the Pod-related modules included with Perl.

“Attribute::Handlers”

Attribute::Handlers can now report the caller’s file and line number. (David Feldman) All interpreted attributes are now passed as array references. (Damian Conway)

“B::Lint”

B::Lint is now based on Module::Pluggable, and so can be extended with plugins. (Joshua ben Jore)

“B”

It’s now possible to access the lexical pragma hints (%^H) by using the method B::COP::hints_hash(). It returns a B::RHE object, which in turn can be used to get a hash reference via the method B::RHE::HASH(). (Joshua ben Jore)

“Thread”

As the old 5005thread threading model has been removed, in favor of the ithreads scheme, the Thread module is now a compatibility wrapper, to be used in old code only. It has been removed from the default list of dynamic extensions.

Sorting arrays in place (@a = sort @a) is now optimized to avoid making a temporary copy of the array.

Likewise, reverse sort ... is now optimized to sort in reverse, avoiding the generation of a temporary intermediate list.

Access to elements of lexical arrays via a numeric constant between 0 and 255 is now faster. (This used to be only the case for global arrays.)

Some pure-perl code that perl was using to retrieve Unicode properties and transliteration mappings has been reimplemented in XS.

The interpreter internals now support a far more memory efficient form of inlineable constants. Storing a reference to a constant value in a symbol table is equivalent to a full typeglob referencing a constant subroutine, but using about 400 bytes less memory. This proxy constant subroutine is automatically upgraded to a real typeglob with subroutine if necessary. The approach taken is analogous to the existing space optimisation for subroutine stub declarations, which are stored as plain scalars in place of the full typeglob.

Several of the core modules have been converted to use this feature for their system dependent constants - as a result use POSIX; now takes about 200K less memory.

The new compilation flag PERL_DONT_CREATE_GVSV, introduced as an option in perl 5.8.8, is turned on by default in perl 5.9.3. It prevents perl from creating an empty scalar with every new typeglob. See perl589delta for details.

Weak reference creation is now O(1) rather than O(n), courtesy of Nicholas Clark. Weak reference deletion remains O(n), but if deletion only happens at program exit, it may be skipped completely.

Salvador Fandin~o provided improvements to reduce the memory usage of sort and to speed up some cases.

Several internal data structures (typeglobs, GVs, CVs, formats) have been restructured to use less memory. (Nicholas Clark)

The UTF-8 caching code is now more efficient, and used more often. (Nicholas Clark)

On Windows, perl’s stat() function normally opens the file to determine the link count and update attributes that may have been changed through hard links. Setting ${^WIN32_SLOPPY_STAT} to a true value speeds up stat() by not performing this operation. (Jan Dubois)

Engine de-recursivised

The regular expression engine is no longer recursive, meaning that patterns that used to overflow the stack will either die with useful explanations, or run to completion, which, since they were able to blow the stack before, will likely take a very long time to happen. If you were experiencing the occasional stack overflow (or segfault) and upgrade to discover that now perl apparently hangs instead, look for a degenerate regex. (Dave Mitchell)

Single char char-classes treated as literals

Classes of a single character are now treated the same as if the character had been used as a literal, meaning that code that uses char-classes as an escaping mechanism will see a speedup. (Yves Orton)

Trie optimisation of literal string alternations

Alternations, where possible, are optimised into more efficient matching structures. String literal alternations are merged into a trie and are matched simultaneously. This means that instead of O(N) time for matching N alternations at a given point, the new code performs in O(1) time. A new special variable, ${^RE_TRIE_MAXBUF}, has been added to fine-tune this optimization. (Yves Orton) Note: Much code exists that works around perl’s historic poor performance on alternations. Often the tricks used to do so will disable the new optimisations. Hopefully the utility modules used for this purpose will be educated about these new optimisations.

Aho-Corasick start-point optimisation

When a pattern starts with a trie-able alternation and there aren’t better optimisations available, the regex engine will use Aho-Corasick matching to find the start point. (Yves Orton)

“-Dusesitecustomize”

Run-time customization of @INC can be enabled by passing the -Dusesitecustomize flag to Configure. When enabled, this will make perl run =$sitelibexp=/sitecustomize.pl before anything else. This script can then be set up to add additional entries to @INC.

Relocatable installations

There is now Configure support for creating a relocatable perl tree. If you Configure with -Duserelocatableinc, then the paths in @INC (and everything else in %Config) can be optionally located via the path of the perl executable. That means that, if the string ".../" is found at the start of any path, it’s substituted with the directory of $^X. So, the relocation can be configured on a per-directory basis, although the default with -Duserelocatableinc is that everything is relocated. The initial install is done to the original configured prefix.

strlcat() and strlcpy()

The configuration process now detects whether strlcat() and strlcpy() are available. When they are not available, perl’s own version is used (from Russ Allbery’s public domain implementation). Various places in the perl interpreter now use them. (Steve Peters)

“d_pseudofork” and “d_printf_format_null”

A new configuration variable, available as $Config{d_pseudofork} in the Config module, has been added, to distinguish real fork() support from fake pseudofork used on Windows platforms. A new configuration variable, d_printf_format_null, has been added, to see if printf-like formats are allowed to be NULL.

Configure help

Configure -h has been extended with the most commonly used options.

Parallel build

Parallel makes should work properly now, although there may still be problems if make test is instructed to run in parallel.

Borland’s compilers support

Building with Borland’s compilers on Win32 should work more smoothly. In particular Steve Hay has worked to side step many warnings emitted by their compilers and at least one C compiler internal error.

Static build on Windows

Perl extensions on Windows now can be statically built into the Perl DLL. Also, it’s now possible to build a perl-static.exe that doesn’t depend on the Perl DLL on Win32. See the Win32 makefiles for details. (Vadim Konovalov)

ppport.h files

All ppport.h files in the XS modules bundled with perl are now autogenerated at build time. (Marcus Holland-Moritz)

C++ compatibility

Efforts have been made to make perl and the core XS modules compilable with various C++ compilers (although the situation is not perfect with some of the compilers on some of the platforms tested.)

Support for Microsoft 64-bit compiler

Support for building perl with Microsoft’s 64-bit compiler has been improved. (ActiveState)

Visual C++

Perl can now be compiled with Microsoft Visual C++ 2005 (and 2008 Beta 2).

Win32 builds

All win32 builds (MS-Win, WinCE) have been merged and cleaned up.

Module auxiliary files

README files and changelogs for CPAN modules bundled with perl are no longer installed.

Perl has been reported to work on Symbian OS. See perlsymbian for more information.

Many improvements have been made towards making Perl work correctly on z/OS.

Perl has been reported to work on DragonFlyBSD and MidnightBSD.

Perl has also been reported to work on NexentaOS ( http://www.gnusolaris.org/ ).

The VMS port has been improved. See perlvms.

Support for Cray XT4 Catamount/Qk has been added. See hints/catamount.sh in the source code distribution for more information.

Vendor patches have been merged for RedHat and Gentoo.

DynaLoader::dl_unload_file() now works on Windows.

The relative ordering of constants that define the various types of SV have changed; in particular, SVt_PVGV has been moved before SVt_PVLV, SVt_PVAV, SVt_PVHV and SVt_PVCV. This is unlikely to make any difference unless you have code that explicitly makes assumptions about that ordering. (The inheritance hierarchy of B::* objects has been changed to reflect this.)

Related to this, the internal type SVt_PVBM has been removed. This dedicated type of SV was used by the index operator and parts of the regexp engine to facilitate fast Boyer-Moore matches. Its use internally has been replaced by SV=s of type =SVt_PVGV.

A new type SVt_BIND has been added, in readiness for the project to implement Perl 6 on 5. There deliberately is no implementation yet, and they cannot yet be created or destroyed.

The C preprocessor symbols PERL_PM_APIVERSION and PERL_XS_APIVERSION, which were supposed to give the version number of the oldest perl binary-compatible (resp. source-compatible) with the present one, were not used, and sometimes had misleading values. They have been removed.

The BASEOP structure now uses less space. The op_seq field has been removed and replaced by a single bit bit-field op_opt. op_type is now 9 bits long. (Consequently, the B::OP class doesn’t provide an seq method anymore.)

perl’s parser is now generated by bison (it used to be generated by byacc.) As a result, it seems to be a bit more robust.

Also, Dave Mitchell improved the lexer debugging output under -DT.

Andy Lester supplied many improvements to determine which function parameters and local variables could actually be declared const to the C compiler. Steve Peters provided new *_set macros and reworked the core to use these rather than assigning to macros in LVALUE context.

A new file, mathoms.c, has been added. It contains functions that are no longer used in the perl core, but that remain available for binary or source compatibility reasons. However, those functions will not be compiled in if you add -DNO_MATHOMS in the compiler flags.

The AvFLAGS macro has been removed.

The av_*() functions, used to manipulate arrays, no longer accept null AV* parameters.

The implementation of the special variables $^H and %^H has changed, to allow implementing lexical pragmas in pure Perl.

The inheritance hierarchy of B:: modules has changed; B::NV now inherits from B::SV (it used to inherit from B::IV).

The anonymous hash and array constructors now take 1 op in the optree instead of 3, now that pp_anonhash and pp_anonlist return a reference to a hash/array when the op is flagged with OPf_SPECIAL. (Nicholas Clark)

The handling of Unicode still is unclean in several places, where it’s dependent on whether a string is internally flagged as UTF-8. This will be made more consistent in perl 5.12, but that won’t be possible without a certain amount of backwards incompatibility.