Man1 - ghc.1

-dynamic-too

Build dynamic object files as well as static object files during compilation

-fasm

Use the native code generator

-fbyte-code

Generate byte-code

-fexternal-dynamic-refs

Generate code for linking against dynamic libraries

-fllvm

Compile using the LLVM code generator

-fno-code

Omit code generation

-fobject-code

Generate object code

-fPIC

Generate position-independent code (where available)

-fPIE

Generate code for a position-independent executable (where available)

-fwrite-interface

Always write interface files

-dcmm-lint

C-­ pass sanity checking

-dcore-lint

Turn on internal sanity checking

-ddump-asm

Dump final assembly

-ddump-asm-expanded

Dump the result of the synthetic instruction expansion pass.

-ddump-asm-liveness

Dump assembly augmented with register liveness

-ddump-asm-native

Dump initial assembly

-ddump-asm-regalloc

Dump the result of register allocation

-ddump-asm-regalloc-stages

Dump the build/spill stages of the -fregs-graph register allocator.

-ddump-asm-stats

Dump statistics from the register allocator.

-ddump-bcos

Dump interpreter byte code

-ddump-cfg-weights

Dump the assumed weights of the CFG.

-ddump-cmm

Dump the final C-­ output

-ddump-cmm-caf

Dump the results of the C-­ CAF analysis pass.

-ddump-cmm-cbe

Dump the results of common block elimination

-ddump-cmm-cfg

Dump the results of the C-­ control flow optimisation pass.

-ddump-cmm-cps

Dump the results of the CPS pass

-ddump-cmm-from-stg

Dump STG-to-C-­ output

-ddump-cmm-info

Dump the results of the C-­ info table augmentation pass.

-ddump-cmm-opt

Dump the results of C-­ to C-­ optimising passes

-ddump-cmm-proc

Dump the results of proc-point analysis

-ddump-cmm-procmap

Dump the results of the C-­ proc-point map pass.

-ddump-cmm-raw

Dump raw C-­

-ddump-cmm-sink

Dump the results of the C-­ sinking pass.

-ddump-cmm-sp

Dump the results of the C-­ stack layout pass.

-ddump-cmm-split

Dump the results of the C-­ proc-point splitting pass.

-ddump-cmm-switch

Dump the results of switch lowering passes

-ddump-cmm-verbose

Write output from main C-­ pipeline passes to files

-ddump-cmm-verbose-by-proc

Show output from main C-­ pipeline passes (grouped by proc)

-ddump-core-stats

Print a one-line summary of the size of the Core program at the end of the optimisation pipeline

-ddump-cpr-signatures

Dump CPR signatures

-ddump-cpranal

Dump CPR analysis output

-ddump-cse

Dump CSE output

-ddump-deriv

Dump deriving output

-ddump-ds

Dump desugarer output.

-ddump-ec-trace

Trace exhaustiveness checker

-ddump-file-prefix=⟨str⟩

Set the prefix of the filenames used for debugging output.

-ddump-foreign

Dump foreign export stubs

-ddump-hie

Dump the hie file syntax tree

-ddump-hpc

An alias for -ddump-ticked.

-ddump-if-trace

Trace interface files

-ddump-inlinings

Dump inlining info

-ddump-json

Dump error messages as JSON documents

-ddump-llvm

Dump LLVM intermediate code.

-ddump-mod-map

Dump the state of the module mapping database.

-ddump-occur-anal

Dump occurrence analysis output

-ddump-opt-cmm

Dump the results of C-­ to C-­ optimising passes

-ddump-parsed

Dump parse tree

-ddump-parsed-ast

Dump parser output as a syntax tree

-ddump-prep

Dump prepared core

-ddump-rn

Dump renamer output

-ddump-rn-ast

Dump renamer output as a syntax tree

-ddump-rn-stats

Renamer stats

-ddump-rn-trace

Trace renamer

-ddump-rtti

Trace runtime type inference

-ddump-rule-firings

Dump rule firing info

-ddump-rule-rewrites

Dump detailed rule firing info

-ddump-rules

Dump rewrite rules

-ddump-simpl

Dump final simplifier output

-ddump-simpl-iterations

Dump output from each simplifier iteration

-ddump-simpl-stats

Dump simplifier stats

-ddump-spec

Dump specialiser output

-ddump-splices

Dump TH spliced expressions, and what they evaluate to

-ddump-stg

Show CoreToStg output

-ddump-stg-final

Show output of last STG pass.

-ddump-stg-unarised

Show unarised STG

-ddump-str-signatures

Dump strictness signatures

-ddump-stranal

Dump strictness analyser output

-ddump-tc

Dump typechecker output

-ddump-tc-ast

Dump typechecker output as a syntax tree

-ddump-tc-trace

Trace typechecker

-ddump-ticked

Dump the code instrumented by HPC (hpc).

-ddump-timings

Dump per-pass timing and allocation statistics

-ddump-to-file

Dump to files instead of stdout

-ddump-types

Dump type signatures

-ddump-worker-wrapper

Dump worker-wrapper output

-dfaststring-stats

Show statistics for fast string usage when finished

-dhex-word-literals

Print values of type Word# in hexadecimal.

-dinitial-unique=⟨s⟩

Start UniqSupply allocation from ⟨s⟩.

-dinline-check=⟨str⟩

Dump information about inlining decisions

-dlinear-core-lint

Turn on internal sanity checking

-dno-debug-output

Suppress unsolicited debugging output

-dno-typeable-binds

Don’t generate bindings for Typeable methods

-dppr-case-as-let

Print single alternative case expressions as strict lets.

-dppr-cols=⟨n⟩

Set the width of debugging output. For example -dppr-cols200

-dppr-debug

Turn on debug printing (more verbose)

-dppr-user-length

Set the depth for printing expressions in error msgs

-drule-check=⟨str⟩

Dump information about potential rule application

-dshow-passes

Print out each pass name as it happens

-dstg-lint

STG pass sanity checking

-dsuppress-all

In dumps, suppress everything (except for uniques) that is suppressible.

-dsuppress-coercions

Suppress the printing of coercions in Core dumps to make them shorter

-dsuppress-idinfo

Suppress extended information about identifiers where they are bound

-dsuppress-module-prefixes

Suppress the printing of module qualification prefixes

-dsuppress-stg-free-vars

Suppress the printing of closure free variable lists in STG output

-dsuppress-ticks

Suppress “ticks” in the pretty-printer output.

-dsuppress-timestamps

Suppress timestamps in dumps

-dsuppress-type-applications

Suppress type applications

-dsuppress-type-signatures

Suppress type signatures

-dsuppress-unfoldings

Suppress the printing of the stable unfolding of a variable at its binding site

-dsuppress-uniques

Suppress the printing of uniques in debug output (easier to use diff)

-dsuppress-var-kinds

Suppress the printing of variable kinds

-dth-dec-file

Dump evaluated TH declarations into *.th.hs files

-dunique-increment=⟨i⟩

Set the increment for the generated Unique’s to ⟨i⟩.

-dverbose-core2core

Show output from each core-to-core pass

-dverbose-stg2stg

Show output from each STG-to-STG pass

-falignment-sanitisation

Compile with alignment checks for all info table dereferences.

-fcatch-bottoms

Add a default error alternative to case expressions without a default alternative.

-fllvm-fill-undef-with-garbage

Intruct LLVM to fill dead STG registers with garbage

-fproc-alignment

Align functions at given boundary.

-g

Produce DWARF debug information in compiled object files. ⟨n⟩ can be 0, 1, or 2, with higher numbers producing richer output. If ⟨n⟩ is omitted, level 2 is assumed.

-cpp

Run the C pre-processor on Haskell source files

-D⟨symbol⟩[=⟨value⟩]

Define a symbol in the C pre-processor

-I⟨dir⟩

Add ⟨dir⟩ to the directory search list for #include files

-U⟨symbol⟩

Undefine a symbol in the C pre-processor

-i

Empty the import directory list

-i⟨dir⟩[:⟨dir⟩]*

add ⟨dir⟩, ⟨dir2⟩, etc. to import path

-fbreak-on-error

Break on uncaught exceptions and errors

-fbreak-on-exception

Break on any exception thrown

-fghci-hist-size=⟨n⟩

Set the number of entries GHCi keeps for :history. See ghci-debugger.

-fghci-leak-check

(Debugging only) check for space leaks when loading new modules in GHCi.

-flocal-ghci-history

Use current directory for the GHCi command history file .ghci-history.

-fno-it

No longer set the special variable it.

-fprint-bind-result

Turn on printing of binding results in GHCi

-fprint-evld-with-show

Instruct :print to use Show instances where possible.

-fshow-loaded-modules

Show the names of modules that GHCi loaded after a :load command.

-ghci-script

Read additional .ghci files

-ignore-dot-ghci

Disable reading of .ghci files

*-interactive-print ⟨name⟩*

Select the function to use for printing evaluated expressions in GHCi

*–show-iface ⟨file⟩*

See modes.

-ddump-hi

Dump the new interface to stdout

-ddump-hi-diffs

Show the differences vs. the old interface

-ddump-minimal-imports

Dump a minimal set of imports

-keep-hc-file

Retain intermediate .hc files.

-keep-hi-files

Retain intermediate .hi files (the default).

-keep-hscpp-file

Retain intermediate .hscpp files.

-keep-llvm-file

Retain intermediate LLVM .ll files. Implies -fllvm.

-keep-o-files

Retain intermediate .o files (the default).

-keep-s-file

Retain intermediate .s files.

-keep-tmp-files

Retain all intermediate temporary files.

-XAllowAmbiguousTypes

Allow the user to write ambiguous types, and the type inference engine to infer them.

-XApplicativeDo

Enable Applicative do-notation desugaring

-XArrows

Enable arrow notation extension

-XBangPatterns

Enable bang patterns.

-XBinaryLiterals

Enable support for binary literals.

-XBlockArguments

Allow do blocks and other constructs as function arguments.

-XCApiFFI

Enable the CAPI calling convention.

-XConstrainedClassMethods

Enable constrained class methods.

-XConstraintKinds

Enable a kind of constraints.

-XCPP

Enable the C preprocessor.

-XCUSKs

Enable detection of complete user-supplied kind signatures.

-XDataKinds

Enable datatype promotion.

-XDatatypeContexts

Allow contexts on data types.

-XDefaultSignatures

Enable default signatures.

-XDeriveAnyClass

Enable deriving for any class.

-XDeriveDataTypeable

Enable deriving for the Data class. Implied by (deprecated) AutoDeriveTypeable.

-XDeriveFoldable

Enable deriving for the Foldable class. Implied by DeriveTraversable.

-XDeriveFunctor

Enable deriving for the Functor class. Implied by DeriveTraversable.

-XDeriveGeneric

Enable deriving for the Generic class.

-XDeriveLift

Enable deriving for the Lift class

-XDeriveTraversable

Enable deriving for the Traversable class. Implies DeriveFunctor and DeriveFoldable.

-XDerivingStrategies

Enables deriving strategies.

-XDerivingVia

Enable deriving instances via types of the same runtime representation. Implies DerivingStrategies.

-XDisambiguateRecordFields

Enable record field disambiguation. Implied by RecordWildCards.

-XDuplicateRecordFields

Allow definition of record types with identically-named fields.

-XEmptyCase

Allow empty case alternatives.

-XEmptyDataDecls

Allow definition of empty data types.

-XEmptyDataDeriving

Allow deriving instances of standard type classes for empty data types.

-XExistentialQuantification

Enable liberalised type synonyms.

-XExplicitForAll

Enable explicit universal quantification. Implied by ScopedTypeVariables, LiberalTypeSynonyms, RankNTypes and ExistentialQuantification.

-XExplicitNamespaces

Enable using the keyword type to specify the namespace of entries in imports and exports (explicit-namespaces). Implied by TypeOperators and TypeFamilies.

-XExtendedDefaultRules

Use GHCi’s extended default rules in a normal module.

-XFlexibleContexts

Enable flexible contexts.

-XFlexibleInstances

Enable flexible instances. Implies TypeSynonymInstances.

-XForeignFunctionInterface

Enable foreign function interface.

-XFunctionalDependencies

Enable functional dependencies. Implies MultiParamTypeClasses.

-XGADTs

Enable generalised algebraic data types. Implies GADTSyntax and MonoLocalBinds.

-XGADTSyntax

Enable generalised algebraic data type syntax.

-XGeneralisedNewtypeDeriving

Enable newtype deriving.

-XGeneralizedNewtypeDeriving

Enable newtype deriving.

-XGHCForeignImportPrim

Enable prim calling convention. Intended for internal use only.

-XHaskell2010

Use the Haskell 2010 language variant.

-XHaskell98

Use the Haskell 98 language variant.

-XHexFloatLiterals

Enable support for hexadecimal floating point literals.

-XImplicitParams

Enable Implicit Parameters.

-XImportQualifiedPost

ImportQualifiedPost allows the syntax import M qualified

-XImpredicativeTypes

Enable impredicative types. Implies RankNTypes.

-XIncoherentInstances

Enable incoherent instances. Implies OverlappingInstances.

-XInstanceSigs

Enable instance signatures.

-XInterruptibleFFI

Enable interruptible FFI.

-XKindSignatures

Enable kind signatures. Implied by TypeFamilies and PolyKinds.

-XLambdaCase

Enable lambda-case expressions.

-XLexicalNegation

Use whitespace to determine whether the minus sign stands for negation or subtraction.

-XLiberalTypeSynonyms

Enable liberalised type synonyms.

-XLinearTypes

Enable linear types.

-XMagicHash

Allow # as a postfix modifier on identifiers.

-XMonadComprehensions

Enable monad comprehensions.

-XMonadFailDesugaring

Enable monadfail desugaring.

-XMonoLocalBinds

Enable do not generalise local bindings. Implied by TypeFamilies and GADTs.

-XMultiParamTypeClasses

Enable multi parameter type classes. Implied by FunctionalDependencies.

-XMultiWayIf

Enable multi-way if-expressions.

-XNamedFieldPuns

Enable record puns.

-XNamedWildCards

Enable named wildcards.

-XNegativeLiterals

Enable support for negative literals.

-XNoImplicitPrelude

Don’t implicitly import Prelude. Implied by RebindableSyntax.

-XNoMonomorphismRestriction

Disable the monomorphism restriction.

-XNondecreasingIndentation

Allow nested contexts to be at the same indentation level as its enclosing context.

-XNoPatternGuards

Disable pattern guards. Implied by Haskell98.

-XNoTraditionalRecordSyntax

Disable support for traditional record syntax (as supported by Haskell 98) C {f = x}

-XNPlusKPatterns

Enable support for n+k patterns. Implied by Haskell98.

-XNullaryTypeClasses

Deprecated, does nothing. nullary (no parameter) type classes are now enabled using MultiParamTypeClasses.

-XNumDecimals

Enable support for ’fractional’ integer literals.

-XNumericUnderscores

Enable support for numeric underscores.

-XOverlappingInstances

Enable overlapping instances.

-XOverloadedLabels

Enable overloaded labels.

-XOverloadedLists

Enable overloaded lists.

-XOverloadedStrings

Enable overloaded string literals.

-XPackageImports

Enable package-qualified imports.

-XParallelListComp

Enable parallel list comprehensions.

-XPartialTypeSignatures

Enable partial type signatures.

-XPatternSynonyms

Enable pattern synonyms.

-XPolyKinds

Enable kind polymorphism. Implies KindSignatures.

-XPostfixOperators

Enable postfix operators.

-XQualifiedDo

Enable qualified do-notation desugaring.

-XQuantifiedConstraints

Allow forall quantifiers in constraints.

-XQuasiQuotes

Enable quasiquotation.

-XRank2Types

Enable rank-2 types. Synonym for RankNTypes.

-XRankNTypes

Enable rank-N types. Implied by ImpredicativeTypes.

-XRebindableSyntax

Employ rebindable syntax. Implies NoImplicitPrelude.

-XRecordWildCards

Enable record wildcards. Implies DisambiguateRecordFields.

-XRecursiveDo

Enable recursive do (mdo) notation.

-XRoleAnnotations

Enable role annotations.

-XSafe

Enable the Safe Haskell Safe mode.

-XScopedTypeVariables

Enable lexically-scoped type variables.

-XStandaloneDeriving

Enable standalone deriving.

-XStandaloneKindSignatures

Allow the use of standalone kind signatures.

-XStarIsType

Treat * as Data.Kind.Type.

-XStaticPointers

Enable static pointers.

-XStrict

Make bindings in the current module strict by default.

-XStrictData

Enable default strict datatype fields.

-XTemplateHaskell

Enable Template Haskell.

-XTemplateHaskellQuotes

Enable quotation subset of Template Haskell.

-XTransformListComp

Enable generalised list comprehensions.

-XTrustworthy

Enable the Safe Haskell Trustworthy mode.

-XTupleSections

Enable tuple sections.

-XTypeApplications

Enable type application syntax in terms and types.

-XTypeFamilies

Enable type families. Implies ExplicitNamespaces, KindSignatures, and MonoLocalBinds.

-XTypeFamilyDependencies

Enable injective type families. Implies TypeFamilies.

-XTypeInType

Deprecated. Enable kind polymorphism and datatype promotion.

-XTypeOperators

Enable type operators. Implies ExplicitNamespaces.

-XTypeSynonymInstances

Enable type synonyms in instance heads. Implied by FlexibleInstances.

-XUnboxedSums

Enable unboxed sums.

-XUnboxedTuples

Enable the use of unboxed tuple syntax.

-XUndecidableInstances

Enable undecidable instances.

-XUndecidableSuperClasses

Allow all superclass constraints, including those that may result in non-termination of the typechecker.

-XUnicodeSyntax

Enable unicode syntax.

-XUnliftedFFITypes

Enable unlifted FFI types

-XUnliftedNewtypes

Enable unlifted newtypes.

-XUnsafe

Enable Safe Haskell Unsafe mode.

-XViewPatterns

Enable view patterns.

-c

Stop after generating object (.o) file

-debug

Use the debugging runtime

*-dylib-install-name ⟨path⟩*

Set the install name (via -install_name passed to Apple’s linker), specifying the full install path of the library file. Any libraries or executables that link with it later will pick up that path as their runtime search location for it. (Darwin/OS X only)

-dynamic

Build dynamically-linked object files and executables

-dynload

Selects one of a number of modes for finding shared libraries at runtime.

-eventlog

Enable runtime event tracing

-fkeep-cafs

Do not garbage-collect CAFs (top-level expressions) at runtime

-flink-rts

Link the runtime when generating a shared or static library

-fno-embed-manifest

Do not embed the manifest in the executable (Windows only)

-fno-gen-manifest

Do not generate a manifest file (Windows only)

-fno-shared-implib

Don’t generate an import library for a DLL (Windows only)

*-framework ⟨name⟩*

On Darwin/OS X/iOS only, link in the framework ⟨name⟩. This option corresponds to the -framework option for Apple’s Linker.

*-framework-path ⟨dir⟩*

On Darwin/OS X/iOS only, add ⟨dir⟩ to the list of directories searched for frameworks. This option corresponds to the -F option for Apple’s Linker.

-fwhole-archive-hs-libs

When linking a binary executable, this inserts the flag -Wl,–whole-archive before any -l flags for Haskell libraries, and -Wl,–no-whole-archive afterwards

*-L ⟨dir⟩*

Add ⟨dir⟩ to the list of directories searched for libraries

*-l ⟨lib⟩*

Link in library ⟨lib⟩

*-main-is ⟨thing⟩*

Set main module and function

-no-hs-main

Don’t assume this program contains main

-no-rtsopts-suggestions

Don’t print RTS suggestions about linking with -rtsopts[=⟨none|some|all|ignore|ignoreAll⟩].

*-package ⟨name⟩*

Expose package ⟨pkg⟩

-pie

Instruct the linker to produce a position-independent executable.

-rdynamic

This instructs the linker to add all symbols, not only used ones, to the dynamic symbol table. Currently Linux and Windows/MinGW32 only. This is equivalent to using -optl -rdynamic on Linux, and -optl -export-all-symbols on Windows.

-rtsopts[=⟨none|some|all|ignore|ignoreAll⟩]

Control whether the RTS behaviour can be tweaked via command-line flags and the GHCRTS environment variable. Using none means no RTS flags can be given; some means only a minimum of safe options can be given (the default); all (or no argument at all) means that all RTS flags are permitted; ignore means RTS flags can be given, but are treated as regular arguments and passed to the Haskell program as arguments; ignoreAll is the same as ignore, but GHCRTS is also ignored. -rtsopts does not affect -with-rtsopts behavior; flags passed via -with-rtsopts are used regardless of -rtsopts.

-shared

Generate a shared library (as opposed to an executable)

-split-sections

Split sections for link-time dead-code stripping

-static

Use static Haskell libraries

-staticlib

Generate a standalone static library (as opposed to an executable). This is useful when cross compiling. The library together with all its dependencies ends up in in a single static library that can be linked against.

-threaded

Use the threaded runtime

-with-rtsopts=⟨opts⟩

Set the default RTS options to ⟨opts⟩.

-fexternal-interpreter

Run interpreted code in a separate process

-fglasgow-exts

Deprecated. Enable most language extensions; see options-language for exactly which ones.

-fno-safe-haskell

Disable Safe Haskell

*-ghcversion-file ⟨path to ghcversion.h⟩*

(GHC as a C compiler only) Use this ghcversion.h file

*-H ⟨size⟩*

Set the minimum size of the heap to ⟨size⟩

-j[⟨n⟩]

When compiling with –make, compile ⟨n⟩ modules in parallel.

*–frontend ⟨module⟩*

run GHC with the given frontend plugin; see frontend_plugins for details.

–help

Display help

–info

display information about the compiler

–interactive

Interactive mode - normally used by just running ghci; see ghci for details.

–make

Build a multi-module Haskell program, automatically figuring out dependencies. Likely to be much easier, and faster, than using make; see make-mode for details.

–mk-dll

DLL-creation mode (Windows only)

–numeric-version

display GHC version (numeric only)

–print-libdir

display GHC library directory

*–show-iface ⟨file⟩*

display the contents of an interface file.

–show-options

display the supported command line options

–supported-extensions

display the supported language extensions

–version

display GHC version

*-e ⟨expr⟩*

Evaluate expr; see eval-mode for details.

-M

generate dependency information suitable for use in a Makefile; see makefile-dependencies for details.

-fasm-shortcutting

Enable shortcutting on assembly. Implied by -O2.

-fbinary-blob-threshold=⟨n⟩

default: 500K. Tweak assembly generator for binary blobs.

-fblock-layout-cfg

Use the new cfg based block layout algorithm.

-fblock-layout-weightless

Ignore cfg weights for code layout.

-fblock-layout-weights

Sets edge weights used by the new code layout algorithm.

-fcall-arity

Enable call-arity optimisation. Implied by -O.

-fcase-folding

Enable constant folding in case expressions. Implied by -O.

-fcase-merge

Enable case-merging. Implied by -O.

-fcmm-elim-common-blocks

Enable Cmm common block elimination. Implied by -O.

-fcmm-sink

Enable Cmm sinking. Implied by -O.

-fcmm-static-pred

Enable static control flow prediction. Implied by -O.

-fcpr-anal

Turn on CPR analysis in the demand analyser. Implied by -O.

-fcross-module-specialise

Turn on specialisation of overloaded functions imported from other modules.

-fcse

Enable common sub-expression elimination. Implied by -O.

-fdicts-cheap

Make dictionary-valued expressions seem cheap to the optimiser.

-fdicts-strict

Make dictionaries strict

-fdmd-tx-dict-sel

Use a special demand transformer for dictionary selectors. Always enabled by default.

-fdo-eta-reduction

Enable eta-reduction. Implied by -O.

-fdo-lambda-eta-expansion

Enable lambda eta-expansion. Always enabled by default.

-feager-blackholing

Turn on eager blackholing

-fenable-rewrite-rules

Switch on all rewrite rules (including rules generated by automatic specialisation of overloaded functions). Implied by -O.

-fexcess-precision

Enable excess intermediate precision

-fexitification

Enables exitification optimisation. Implied by -O.

-fexpose-all-unfoldings

Expose all unfoldings, even for very large or recursive functions.

-ffloat-in

Turn on the float-in transformation. Implied by -O.

-ffull-laziness

Turn on full laziness (floating bindings outwards). Implied by -O.

-ffun-to-thunk

Allow worker-wrapper to convert a function closure into a thunk if the function does not use any of its arguments. Off by default.

-fignore-asserts

Ignore assertions in the source. Implied by -O.

-fignore-interface-pragmas

Ignore pragmas in interface files. Implied by -O0 only.

-flate-dmd-anal

Run demand analysis again, at the end of the simplification pipeline

-flate-specialise

Run a late specialisation pass

-fliberate-case

Turn on the liberate-case transformation. Implied by -O2.

-fliberate-case-threshold=⟨n⟩

default: 2000. Set the size threshold for the liberate-case transformation to ⟨n⟩

-fllvm-pass-vectors-in-regs

Pass vector value in vector registers for function calls

-floopification

Turn saturated self-recursive tail-calls into local jumps in the generated assembly. Implied by -O.

-fmax-inline-alloc-size=⟨n⟩

default: 128. Set the maximum size of inline array allocations to ⟨n⟩ bytes (default: 128).

-fmax-inline-memcpy-insns=⟨n⟩

default: 32. Inline memcpy calls if they would generate no more than ⟨n⟩ pseudo instructions.

-fmax-inline-memset-insns=⟨n⟩

default: 32. Inline memset calls if they would generate no more than ⟨n⟩ pseudo instructions

-fmax-simplifier-iterations=⟨n⟩

default: 4. Set the max iterations for the simplifier.

-fmax-uncovered-patterns=⟨n⟩

default: 4. Set the maximum number of patterns to display in warnings about non-exhaustive ones.

-fmax-worker-args=⟨n⟩

default: 10. Maximum number of value arguments for a worker.

-fno-opt-coercion

Turn off the coercion optimiser

-fno-pre-inlining

Turn off pre-inlining

-fno-state-hack

Turn off the state hackwhereby any lambda with a real-world state token as argument is considered to be single-entry. Hence OK to inline things inside it.

-fomit-interface-pragmas

Don’t generate interface pragmas. Implied by -O0 only.

-fomit-yields

Omit heap checks when no allocation is being performed.

-foptimal-applicative-do

Use a slower but better algorithm for ApplicativeDo

-fpedantic-bottoms

Make GHC be more precise about its treatment of bottom (but see also -fno-state-hack). In particular, GHC will not eta-expand through a case expression.

-fregs-graph

Use the graph colouring register allocator for register allocation in the native code generator. Implied by -O2.

-fregs-iterative

Use the iterative coalescing graph colouring register allocator in the native code generator.

-fsimpl-tick-factor=⟨n⟩

default: 100. Set the percentage factor for simplifier ticks.

-fsimplifier-phases=⟨n⟩

default: 2. Set the number of phases for the simplifier. Ignored with -O0.

-fsolve-constant-dicts

When solving constraints, try to eagerly solve super classes using available dictionaries.

-fspec-constr

Turn on the SpecConstr transformation. Implied by -O2.

-fspec-constr-count=⟨n⟩

default: 3.* Set to ⟨n⟩ the maximum number of specialisations that will be created for any one function by the SpecConstr transformation.

-fspec-constr-keen

Specialize a call with an explicit constructor argument, even if the argument is not scrutinised in the body of the function

-fspec-constr-threshold=⟨n⟩

default: 2000. Set the size threshold for the SpecConstr transformation to ⟨n⟩.

-fspecialise

Turn on specialisation of overloaded functions. Implied by -O.

-fspecialise-aggressively

Turn on specialisation of overloaded functions regardless of size, if unfolding is available

-fstatic-argument-transformation

Turn on the static argument transformation.

-fstg-cse

Enable common sub-expression elimination on the STG intermediate language

-fstg-lift-lams

Enable late lambda lifting on the STG intermediate language. Implied by -O2.

-fstg-lift-lams-known

Allow turning known into unknown calls while performing late lambda lifting.

-fstg-lift-lams-non-rec-args

Create top-level non-recursive functions with at most <n> parameters while performing late lambda lifting.

-fstg-lift-lams-rec-args

Create top-level recursive functions with at most <n> parameters while performing late lambda lifting.

-fstrictness

Turn on strictness analysis. Implied by -O. Implies -fworker-wrapper

-fstrictness-before=⟨n⟩

Run an additional strictness analysis before simplifier phase ⟨n⟩

-funbox-small-strict-fields

Flatten strict constructor fields with a pointer-sized representation. Implied by -O.

-funbox-strict-fields

Flatten strict constructor fields

-funfolding-creation-threshold=⟨n⟩

default: 750. Tweak unfolding settings.

-funfolding-dict-discount=⟨n⟩

default: 30. Tweak unfolding settings.

-funfolding-fun-discount=⟨n⟩

default: 60. Tweak unfolding settings.

-funfolding-keeness-factor=⟨n⟩

default: 1.5. Tweak unfolding settings.

-funfolding-use-threshold=⟨n⟩

default: 80. Tweak unfolding settings.

-fworker-wrapper

Enable the worker-wrapper transformation.

-O

Enable level 1 optimisations

-O0

Disable optimisations (default)

-O2

Enable level 2 optimisations

-O⟨n⟩

Any -On where n > 2 is the same as -O2.

-clear-package-db

Clear the package db stack.

*-distrust ⟨pkg⟩*

Expose package ⟨pkg⟩ and set it to be distrusted. See safe-haskell.

-distrust-all-packages

Distrust all packages by default. See safe-haskell.

-fpackage-trust

Enable Safe Haskell trusted package requirement for trustworthy modules.

-global-package-db

Add the global package db to the stack.

-hide-all-packages

Hide all packages by default

*-hide-package ⟨pkg⟩*

Hide package ⟨pkg⟩

*-ignore-package ⟨pkg⟩*

Ignore package ⟨pkg⟩

-no-auto-link-packages

Don’t automatically link in the base and rts packages.

-no-global-package-db

Remove the global package db from the stack.

-no-user-package-db

Remove the user’s package db from the stack.

*-package ⟨pkg⟩*

Expose package ⟨pkg⟩

*-package-db ⟨file⟩*

Add ⟨file⟩ to the package db stack.

*-package-env ⟨file⟩|⟨name⟩*

Use the specified package environment.

*-package-id ⟨unit-id⟩*

Expose package by id ⟨unit-id⟩

*-this-unit-id ⟨unit-id⟩*

Compile to be part of unit (i.e. package) ⟨unit-id⟩

*-trust ⟨pkg⟩*

Expose package ⟨pkg⟩ and set it to be trusted. See safe-haskell.

-user-package-db

Add the user’s package db to the stack.

-C

Stop after generating C (.hc file)

-c

Stop after generating object (.o) file

-E

Stop after preprocessing (.hspp file)

-F

Enable the use of a pre-processor (set with -pgmF ⟨cmd⟩)

-S

Stop after generating assembly (.s file)

*-x ⟨suffix⟩*

Override default behaviour for source files

*-pgma ⟨cmd⟩*

Use ⟨cmd⟩ as the assembler

*-pgmc ⟨cmd⟩*

Use ⟨cmd⟩ as the C compiler

*-pgmdll ⟨cmd⟩*

Use ⟨cmd⟩ as the DLL generator

*-pgmF ⟨cmd⟩*

Use ⟨cmd⟩ as the pre-processor (with -F only)

*-pgmi ⟨cmd⟩*

Use ⟨cmd⟩ as the external interpreter command.

*-pgminstall_name_tool ⟨cmd⟩*

Use ⟨cmd⟩ as the program to inject runpath into mach-o dylibs on macOS

*-pgmL ⟨cmd⟩*

Use ⟨cmd⟩ as the literate pre-processor

*-pgml ⟨cmd⟩*

Use ⟨cmd⟩ as the linker

*-pgmlc ⟨cmd⟩*

Use ⟨cmd⟩ as the LLVM compiler

*-pgmlibtool ⟨cmd⟩*

Use ⟨cmd⟩ as the command for libtool (with -staticlib only).

*-pgmlm ⟨cmd⟩*

Use ⟨cmd⟩ as the linker when merging object files

*-pgmlo ⟨cmd⟩*

Use ⟨cmd⟩ as the LLVM optimiser

*-pgmotool ⟨cmd⟩*

Use ⟨cmd⟩ as the program to inspect mach-o dylibs on macOS

*-pgmP ⟨cmd⟩*

Use ⟨cmd⟩ as the C pre-processor (with -cpp only)

*-pgms ⟨cmd⟩*

Use ⟨cmd⟩ as the splitter

*-pgmwindres ⟨cmd⟩*

Use ⟨cmd⟩ as the program for embedding manifests on Windows.

*-opta ⟨option⟩*

pass ⟨option⟩ to the assembler

*-optc ⟨option⟩*

pass ⟨option⟩ to the C compiler

*-optcxx ⟨option⟩*

pass ⟨option⟩ to the C++ compiler

*-optdll ⟨option⟩*

pass ⟨option⟩ to the DLL generator

*-optF ⟨option⟩*

pass ⟨option⟩ to the custom pre-processor

*-opti ⟨option⟩*

pass ⟨option⟩ to the interpreter sub-process.

*-optL ⟨option⟩*

pass ⟨option⟩ to the literate pre-processor

*-optl ⟨option⟩*

pass ⟨option⟩ to the linker

*-optlc ⟨option⟩*

pass ⟨option⟩ to the LLVM compiler

*-optlm ⟨option⟩*

pass ⟨option⟩ to the linker when merging object files.

*-optlo ⟨option⟩*

pass ⟨option⟩ to the LLVM optimiser

*-optP ⟨option⟩*

pass ⟨option⟩ to cpp (with -cpp only)

*-optwindres ⟨option⟩*

pass ⟨option⟩ to windres.

-pgmc-supports-no-pie

Indicate that the C compiler supports -no-pie

-mbmi2

(x86 only) Use BMI2 for bit manipulation operations

-msse2

(x86 only) Use SSE2 for floating-point operations

-msse4.2

(x86 only) Use SSE4.2 for floating-point operations

-fclear-plugins

Clear the list of active plugins

-fplugin-opt=⟨module⟩:⟨args⟩

Give arguments to a plugin module; module must be specified with -fplugin=⟨module⟩

-fplugin-trustworthy

Trust the used plugins and no longer mark the compiled module as unsafe

-fplugin=⟨module⟩

Load a plugin exported by a given module

-hide-all-plugin-packages

Hide all packages for plugins by default

*-plugin-package ⟨pkg⟩*

Expose ⟨pkg⟩ for plugins

*-plugin-package-id ⟨pkg-id⟩*

Expose ⟨pkg-id⟩ for plugins

-fno-prof-auto

Disables any previous -fprof-auto, -fprof-auto-top, or -fprof-auto-exported options.

-fno-prof-cafs

Disables any previous -fprof-cafs option.

-fno-prof-count-entries

Do not collect entry counts

-fprof-auto

Auto-add SCC\ s to all bindings not marked INLINE

-fprof-auto-calls

Auto-add SCC\ s to all call sites

-fprof-auto-exported

Auto-add SCC\ s to all exported bindings not marked INLINE

-fprof-auto-top

Auto-add SCC\ s to all top-level bindings not marked INLINE

-fprof-cafs

Auto-add SCC\ s to all CAFs

-prof

Turn on profiling

-ticky

Turn on ticky-ticky profiling

-fhpc

Turn on Haskell program coverage instrumentation

-fforce-recomp

Turn off recompilation checking. This is implied by any -ddump-X option when compiling a single file (i.e. when using -c).

-fignore-hpc-changes

Do not recompile modules just to match changes to HPC flags. This is especially useful for avoiding recompilation when using GHCi, and is enabled by default for GHCi.

-fignore-optim-changes

Do not recompile modules just to match changes to optimisation flags. This is especially useful for avoiding recompilation when using GHCi, and is enabled by default for GHCi.

–exclude-module=⟨file⟩

Regard ⟨file⟩ as “stable”; i.e., exclude it from having dependencies on it.

-ddump-mod-cycles

Dump module cycles

*-dep-makefile ⟨file⟩*

Use ⟨file⟩ as the makefile

*-dep-suffix ⟨suffix⟩*

Make dependencies that declare that files with suffix .⟨suf⟩⟨osuf⟩ depend on interface files with suffix .⟨suf⟩hi

*-dumpdir ⟨dir⟩*

redirect dump files

*-hcsuf ⟨suffix⟩*

set the suffix to use for intermediate C files

*-hidir ⟨dir⟩*

set directory for interface files

*-hiedir ⟨dir⟩*

set directory for extended interface files

*-hiesuf ⟨suffix⟩*

set the suffix to use for extended interface files

*-hisuf ⟨suffix⟩*

set the suffix to use for interface files

-include-cpp-deps

Include preprocessor dependencies

-include-pkg-deps

Regard modules imported from packages as unstable

*-o ⟨file⟩*

set output filename

*-odir ⟨dir⟩*

set directory for object files

*-ohi ⟨file⟩*

set the filename in which to put the interface

*-osuf ⟨suffix⟩*

set the output file suffix

*-outputdir ⟨dir⟩*

set output directory

*-stubdir ⟨dir⟩*

redirect FFI stub files

*-tmpdir ⟨dir⟩*

set the directory for temporary files

-fabstract-refinement-hole-fits

default: off. Toggles whether refinements where one or more of the holes are abstract are reported.

-fdefer-diagnostics

Defer and group diagnostic messages by severity

-fdiagnostics-color=⟨always|auto|never⟩

Use colors in error messages

-fdiagnostics-show-caret

Whether to show snippets of original source code

-ferror-spans

Output full span in error messages

-fhide-source-paths

hide module source and object paths

-fkeep-going

Continue compilation as far as possible on errors

-fmax-refinement-hole-fits=⟨n⟩

default: 6. Set the maximum number of refinement hole fits for typed holes to display in type error messages.

-fmax-relevant-binds=⟨n⟩

default: 6. Set the maximum number of bindings to display in type error messages.

-fmax-valid-hole-fits=⟨n⟩

default: 6. Set the maximum number of valid hole fits for typed holes to display in type error messages.

-fno-show-valid-hole-fits

Disables showing a list of valid hole fits for typed holes in type error messages.

-fno-sort-valid-hole-fits

Disables the sorting of the list of valid hole fits for typed holes in type error messages.

-fprint-axiom-incomps

Display equation incompatibilities in closed type families

-fprint-equality-relations

Distinguish between equality relations when printing

-fprint-expanded-synonyms

In type errors, also print type-synonym-expanded types.

-fprint-explicit-coercions

Print coercions in types

-fprint-explicit-foralls

Print explicit forall quantification in types. See also ExplicitForAll

-fprint-explicit-kinds

Print explicit kind foralls and kind arguments in types. See also KindSignatures

-fprint-explicit-runtime-reps

Print RuntimeRep variables in types which are runtime-representation polymorphic.

-fprint-potential-instances

display all available instances in type error messages

-fprint-typechecker-elaboration

Print extra information from typechecker.

-fprint-unicode-syntax

Use unicode syntax when printing expressions, types and kinds. See also UnicodeSyntax

-frefinement-level-hole-fits=⟨n⟩

default: off. Sets the level of refinement of the refinement hole fits, where level n means that hole fits of up to n holes will be considered.

-freverse-errors

Output errors in reverse order

-fshow-docs-of-hole-fits

Toggles whether to show the documentation of the valid hole fits in the output.

-fshow-hole-constraints

Show constraints when reporting typed holes.

-fshow-hole-matches-of-hole-fits

Toggles whether to show the type of the additional holes in refinement hole fits.

-fshow-provenance-of-hole-fits

Toggles whether to show the provenance of the valid hole fits in the output.

-fshow-type-app-of-hole-fits

Toggles whether to show the type application of the valid hole fits in the output.

-fshow-type-app-vars-of-hole-fits

Toggles whether to show what type each quantified variable takes in a valid hole fit.

-fshow-type-of-hole-fits

Toggles whether to show the type of the valid hole fits in the output.

-fsort-by-size-hole-fits

Sort valid hole fits by size.

-fsort-by-subsumption-hole-fits

Sort valid hole fits by subsumption.

-funclutter-valid-hole-fits

Unclutter the list of valid hole fits by not showing provenance nor type applications of suggestions.

-Rghc-timing

Summarise timing stats for GHC (same as +RTS -tstderr).

-v

verbose mode (equivalent to -v3)

-v⟨n⟩

set verbosity level

-fdefer-out-of-scope-variables

Convert variable out of scope variables errors into warnings. Implied by -fdefer-type-errors. See also -Wdeferred-out-of-scope-variables.

-fdefer-type-errors

Turn type errors into warnings, deferring the error until runtime. Implies -fdefer-typed-holes and -fdefer-out-of-scope-variables. See also -Wdeferred-type-errors

-fdefer-typed-holes

Convert typed hole errors into warnings, deferring the error until runtime. Implied by -fdefer-type-errors. See also -Wtyped-holes.

-fenable-th-splice-warnings

Generate warnings for Template Haskell splices

-fhelpful-errors

Make suggestions for mis-spelled names.

-fmax-pmcheck-models=⟨n⟩

soft limit on the number of parallel models the pattern match checker should check a pattern match clause against

-fshow-warning-groups

show which group an emitted warning belongs to.

-fvia-C

use the C code generator

-W

enable normal warnings

-w

disable all warnings

-Wall

enable almost all warnings (details in options-sanity)

-Wall-missed-specialisations

warn when specialisation of any overloaded function fails.

-Wcompat

enable future compatibility warnings (details in options-sanity)

-Wcompat-unqualified-imports

Report unqualified imports of core libraries which are expected to cause compatibility problems in future releases.

-Wcpp-undef

warn on uses of the #if directive on undefined identifiers

-Wdeferred-out-of-scope-variables

Report warnings when variable out-of-scope errors are deferred until runtime. See -fdefer-out-of-scope-variables.

-Wdeferred-type-errors

Report warnings when deferred type errors are enabled. This option is enabled by default. See -fdefer-type-errors.

-Wdeprecated-flags

warn about uses of commandline flags that are deprecated

-Wdeprecations

warn about uses of functions & types that have warnings or deprecated pragmas. Alias for -Wwarnings-deprecations

-Wderiving-defaults

warn about default deriving when using both DeriveAnyClass and GeneralizedNewtypeDeriving

-Wderiving-typeable

warn when Typeable is derived

-Wdodgy-exports

warn about dodgy exports

-Wdodgy-foreign-imports

warn about dodgy foreign imports

-Wdodgy-imports

warn about dodgy imports

-Wduplicate-constraints

warn when a constraint appears duplicated in a type signature

-Wduplicate-exports

warn when an entity is exported multiple times

-Wempty-enumerations

warn about enumerations that are empty

-Werror

make warnings fatal

-Weverything

enable all warnings supported by GHC

-Whi-shadowing

(deprecated) warn when a .hi file in the current directory shadows a library

-Widentities

warn about uses of Prelude numeric conversions that are probably the identity (and hence could be omitted)

-Wimplicit-kind-vars

warn when kind variables are implicitly quantified over.

-Wimplicit-prelude

warn when the Prelude is implicitly imported

-Winaccessible-code

warn about inaccessible code

-Wincomplete-patterns

warn when a pattern match could fail

-Wincomplete-record-updates

warn when a record update could fail

-Wincomplete-uni-patterns

warn when a pattern match in a lambda expression or pattern binding could fail

-Winferred-safe-imports

warn when an explicitly Safe Haskell module imports a Safe-Inferred one

-Winline-rule-shadowing

Warn if a rewrite RULE might fail to fire because the function might be inlined before the rule has a chance to fire. See rules-inline.

-Winvalid-haddock

warn when a Haddock comment occurs in an invalid position

-Wmissed-extra-shared-lib

Warn when GHCi can’t load a shared lib.

-Wmissed-specialisations

warn when specialisation of an imported, overloaded function fails.

-Wmissing-deriving-strategies

warn when a deriving clause is missing a deriving strategy

-Wmissing-export-lists

warn when a module declaration does not explicitly list all exports

-Wmissing-exported-signatures

warn about top-level functions without signatures, only if they are exported. takes precedence over -Wmissing-signatures

-Wmissing-exported-sigs

(deprecated) warn about top-level functions without signatures, only if they are exported. takes precedence over -Wmissing-signatures

-Wmissing-fields

warn when fields of a record are uninitialised

-Wmissing-home-modules

warn when encountering a home module imported, but not listed on the command line. Useful for cabal to ensure GHC won’t pick up modules, not listed neither in exposed-modules, nor in other-modules.

-Wmissing-import-lists

warn when an import declaration does not explicitly list all the names brought into scope

-Wmissing-local-signatures

warn about polymorphic local bindings without signatures

-Wmissing-local-sigs

(deprecated) warn about polymorphic local bindings without signatures

-Wmissing-methods

warn when class methods are undefined

-Wmissing-monadfail-instances

Warn when a failable pattern is used in a do-block that does not have a MonadFail instance.

-Wmissing-pattern-synonym-signatures

warn when pattern synonyms do not have type signatures

-Wmissing-safe-haskell-mode

warn when the Safe Haskell mode is not explicitly specified.

-Wmissing-signatures

warn about top-level functions without signatures

-Wmonomorphism-restriction

warn when the Monomorphism Restriction is applied

-Wname-shadowing

warn when names are shadowed

-Wno-compat

Disables all warnings enabled by -Wcompat.

-Wnoncanonical-monad-instances

warn when Applicative or Monad instances have noncanonical definitions of return, pure, (>>), or (*>). See flag description in options-sanity for more details.

-Wnoncanonical-monadfail-instances

warn when Monad or MonadFail instances have noncanonical definitions of fail. See flag description in options-sanity for more details.

-Wnoncanonical-monoid-instances

warn when Semigroup or Monoid instances have noncanonical definitions of (<>) or mappend. See flag description in options-sanity for more details.

-Worphans

warn when the module contains orphan instance declarations or rewrite rules

-Woverflowed-literals

warn about literals that will overflow their type

-Woverlapping-patterns

warn about overlapping patterns

-Wpartial-fields

warn when defining a partial record field.

-Wpartial-type-signatures

warn about holes in partial type signatures when PartialTypeSignatures is enabled. Not applicable when PartialTypeSignatures is not enabled, in which case errors are generated for such holes.

-Wredundant-constraints

Have the compiler warn about redundant constraints in type signatures.

-Wredundant-record-wildcards

Warn about record wildcard matches when the wildcard binds no patterns.

-Wsafe

warn if the module being compiled is regarded to be safe.

-Wsemigroup

warn when a Monoid is not Semigroup, and on non- Semigroup definitions of (<>)?

-Wsimplifiable-class-constraints

Warn about class constraints in a type signature that can be simplified using a top-level instance declaration.

-Wstar-binder

warn about binding the ()* type operator despite StarIsType

-Wstar-is-type

warn when * is used to mean Data.Kind.Type

-Wtabs

warn if there are tabs in the source file

-Wtrustworthy-safe

warn if the module being compiled is marked as Trustworthy but it could instead be marked as Safe, a more informative bound.

-Wtype-defaults

warn when defaulting happens

-Wtyped-holes

Report warnings when typed hole errors are deferred until runtime. See -fdefer-typed-holes.

-Wunbanged-strict-patterns

warn on pattern bind of unlifted variable that is neither bare nor banged

-Wunrecognised-pragmas

warn about uses of pragmas that GHC doesn’t recognise

-Wunrecognised-warning-flags

throw a warning when an unrecognised -W… flag is encountered on the command line.

-Wunsafe

warn if the module being compiled is regarded to be unsafe. See safe-haskell

-Wunsupported-calling-conventions

warn about use of an unsupported calling convention

-Wunsupported-llvm-version

Warn when using -fllvm with an unsupported version of LLVM.

-Wunticked-promoted-constructors

warn if promoted constructors are not ticked

-Wunused-binds

warn about bindings that are unused. Alias for -Wunused-top-binds, -Wunused-local-binds and -Wunused-pattern-binds

-Wunused-do-bind

warn about do bindings that appear to throw away values of types other than ()

-Wunused-foralls

warn about type variables in user-written forall\s that are unused

-Wunused-imports

warn about unnecessary imports

-Wunused-local-binds

warn about local bindings that are unused

-Wunused-matches

warn about variables in patterns that aren’t used

-Wunused-packages

warn when package is requested on command line, but was never loaded.

-Wunused-pattern-binds

warn about pattern match bindings that are unused

-Wunused-record-wildcards

Warn about record wildcard matches when none of the bound variables are used.

-Wunused-top-binds

warn about top-level bindings that are unused

-Wunused-type-patterns

warn about unused type variables which arise from patterns in in type family and data family instances

-Wwarn

make warnings non-fatal

-Wwarnings-deprecations

warn about uses of functions & types that have warnings or deprecated pragmas

-Wwrong-do-bind

warn about do bindings that appear to throw away monadic values that you should have bound instead