Man1 - cec-ctl.1

cec-ctl - An application to control cec devices

cec-ctl [/-h/] [/-d <dev>/] [many other options]

The cec-ctl tool is used to control cec devices. It is able to control almost any aspect of such devices covering the full CEC API.

The easiest way to quickly test a CEC adapter of an HDMI output is:

cec-ctl -d/dev/cecX –playback -S

And for an HDMI input:

cec-ctl -d/dev/cecX –tv -S

Both commands configure the CEC adapter and show the CEC topology.

To put a display to standby use:

cec-ctl -d/dev/cecX –to 0 –standby

To wake up the display:

cec-ctl -d/dev/cecX –to 0 –image-view-on

To switch the TV to our HDMI output (replace the physical address with what cec-ctl -d/dev/cecX reported):

cec-ctl -d/dev/cecX –to 0 –active-source phys-addr=1.0.0.0

Instead of ’-d/dev/cecX’ you can also write this as ’-dX’. And instead of ’–to 0’ you can also write this as ’-t0’.

-d, –device <dev>

Use device <dev> as the CEC device. If <dev> is a number, then /dev/cec<dev> is used.

-D, –driver <drv>

Use a cec device that has driver name <drv>, as returned by the CEC_ADAP_G_CAPS ioctl. This option can be combined with -a to uniquely identify a CEC device without having to rely on the device node number.

-a, –adapter <adap-name>

Use a cec device that has adapter name <adap-name>, as returned by the CEC_ADAP_G_CAPS ioctl. This option can be combined with -D to uniquely identify a CEC device without having to rely on the device node number.

-v, –verbose

Turn on verbose reporting.

–version

Show version information.

-w, –wall-clock

Show timestamps as wall-clock time. This also turns on verbose reporting.

-h, –help

Prints the help message.

-p, –phys-addr <addr>

Use this physical address. The address can be a number (e.g. 0 or 0x11b1) or formatted as a.b.c.d where each component is a hex value from 0-f (e.g. 0.0.0.0 or 1.1.b.1).

-e, –phys-addr-from-edid <path>

Parse the given EDID file (in raw binary format) and extract the physical address. If the EDID file does not exist or does not contain a physical address, then invalidate the physical address.

-E, –phys-addr-from-edid-poll <path>

Parse the given EDID file (in raw binary format) and extract the physical address. If the EDID file does not exist or does not contain a physical address, then invalidate the physical address. Poll for changes in this EDID file every 100 ms and, if changed, update the physical address.

This provides a way for Pulse-Eight (or similar) USB CEC dongles to become aware of HDMI disconnect and reconnect events.

Polling happens in the background while cec-ctl processes other requested actions (i.e. transmitting messages, waiting for replies, etc.) and when that is all done cec-ctl will keep polling until the user kills cec-ctl (Ctrl-C).

-o, –osd-name <name>

Use this OSD name. The maximum length is 14 characters.

-V, –vendor-id <id>

Use this vendor ID. The vendor ID is a number from 0x0 to 0xffffff.

-l, –logical-address

Show first configured logical address or nothing if the device is unconfigured. Useful for scripts, e.g.: la=`cec-ctl -s -l`

-L, –logical-addresses

Show all configured logical addresses or nothing if the device is unconfigured. Useful for scripts, e.g.: las=`cec-ctl -s -L`

-C, –clear

Clear all logical addresses, leaving the CEC device unconfigured.

-n, –no-reply

By default when sending a CEC message that expects a reply this utility will wait for that reply. With this option it will just send it without waiting for the reply. This option applies to the messages following this option. It acts as a toggle, so after you specify it a second time then the following messages will wait for a reply again.

-N, –non-blocking

Transmit messages in non-blocking mode.

-t, –to <la>

Send the message to the given logical address (0-15).

-f, –from <la>

Send message from the given logical address. It is only necessary to use this option if multiple logical addresses are claimed. By default the first assigned logical address will be used.

-r, –show-raw

Show the raw CEC message in hex.

-s, –skip-info

Skip the Driver Info output section.

-S, –show-topology

Show the CEC topology, detecting which other CEC devices are on the CEC bus.

-P, –poll

Send a poll message.

-T, –trace

Trace all called ioctls. Useful for debugging.

–cec-version-1.4

Use CEC Version 1.4 instead of 2.0 (the default).

–allow-unreg-fallback

Allow fallback to Unregistered if all logical addresses are claimed. By default the adapter will remain unconfigured.

–no-rc-passthrough

Disable the RC passthrough. By default remote control CEC messages are passed on as input keystrokes (the CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag is set when calling the CEC_ADAP_S_LOG_ADDRS ioctl), but this can be blocked by using this option.

–reply-to-followers

The reply will be sent to followers as well. By default the reply will only go to the follower that initiated the CEC message. But if you have other followers running as well, then by giving this option they will also receive the reply.

–timeout <ms>

Set the reply timeout in milliseconds (default is 1000 ms).

–tv

Configure the CEC adapter as a TV.

–record

Configure the CEC adapter as a recording and playback device.

–tuner

Configure the CEC adapter as a tuner device.

–playback

Configure the CEC adapter as a playback device.

–audio

Configure the CEC adapter as an audio system device.

–processor

Configure the CEC adapter as a processor device.

–switch

Configure the CEC adapter as a pure CEC switch.

–cdc-only

Configure the CEC adapter as a CDC-only device.

–unregistered

Configure the CEC adapter as an unregistered device.

–feat-record-tv-screen

Signal the Record TV Screen feature.

–feat-set-osd-string

Signal the Set OSD String feature.

–feat-deck-control

Signal the Deck Control feature.

–feat-set-audio-rate

Signal the Set Audio Rate feature.

–feat-sink-has-arc-tx

Signal the sink ARC Tx feature.

–feat-source-has-arc-rx

Signal the source ARC Rx feature.

–rc-tv-profile-1

Signal RC TV Profile 1.

–rc-tv-profile-2

Signal RC TV Profile 2.

–rc-tv-profile-3

Signal RC TV Profile 3.

–rc-tv-profile-4

Signal RC TV Profile 4.

–rc-src-dev-root

Signal that the RC source has a Dev Root Menu.

–rc-src-dev-setup

Signal that the RC source has a Dev Setup Menu.

–rc-src-contents

Signal that the RC source has a Contents Menu.

–rc-src-media-top

Signal that the RC source has a Media Top Menu.

–rc-src-media-context

Signal that the RC source has a Media Context Menu.

-m, –monitor

Start monitoring CEC traffic. This will monitor broadcast messages, messages directed to this CEC adapter and messages transmitted by this CEC adapter. Directed messages between other CEC devices are not monitored. This option requires root.

-M, –monitor-all

Start monitoring all CEC traffic. This will monitor all CEC messages, including directed messages between other CEC devices. This option requires root. Not all CEC devices support this monitoring mode. It will fallback to regular monitoring mode if it is not supported.

–monitor-pin

Start monitoring and analyzing the low-level CEC pin transitions. This is only possible if the device has the CEC_CAP_MONITOR_PIN capability. This option requires root. When in pin monitoring mode all 0->1 and 1->0 CEC pin transitions are monitored and analysed. This is effectively a cheap CEC bus analyzer.

–monitor-time <secs>

Monitor for the given number of seconds, then exit. The default (0) is to monitor forever.

–ignore <la>,/<opcode>/

Ignore messages from logical address <la> and opcode <opcode> when monitoring. “all” can be used for <la> or <opcode> to match all logical addresses or opcodes. To ignore poll messages use “poll” as <opcode>.

–store-pin <to>

Store the CEC pin events to the given file. This can be read and analyzed later via the –analyze-pin option. Use - to write to stdout instead of to a file.

–analyze-pin <from>

Read and analyze the CEC pin events from the given file. Use - to read from stdin instead of from a file.

–test-power-cycle [/polls/=/<n>/][,/sleep/=/<secs>/]

This option tests the power cycle behavior of the display. It polls up to <n> times (default 15), waiting for a state change. If that fails then it waits <secs> seconds (default 10) before retrying this.

(no term)

–stress-test-power-cycle cnt/=/<count>[,/polls/=/<n>/][,/max-sleep/=/<maxsecs>/][,/min-sleep/=/<minsecs>/][,/seed/=/<seed>/][,/repeats/=/<reps>/][,/sleep-before-on/=/<secs1>/][,/sleep-before-off/=/<secs2>/] :: This option performs a stress test for a display: it power cycles the display <count> times using the CEC Standby and Image View On commands. If <count> is 0, then never stop. It polls up to <n> times (default 30), waiting for a state change. If <maxsecs> is non-zero (0 is the default), then sleep for a random number of seconds between <minsecs> (0 is the default) and <maxsecs> before each <Standby> or <Image View On> message. If <seed> is specified, then set the randomizer seed to that value instead of using the current time as seed. If <reps> is specified, then repeat the <Image View On> and <Standby> up to <reps> times. Note that this test should work without any repeats. If a non-zero <reps> value is needed in order to pass this test, then that indicates a problem. If <secs1> is specified, then sleep for <secs1> seconds before transmitting <Image View On>. If <secs2> is specified, then sleep for <secs2> seconds before transmitting <Standby>.

–help-all

Prints the help message for all options.

–help-audio-rate-control

Show help for the Audio Rate Control feature.

–help-audio-return-channel-control

Show help for the Audio Return Channel Control feature.

–help-capability-discovery-and-control

Show help for the Capability Discovery and Control feature.

–help-deck-control

Show help for the Deck Control feature.

–help-device-menu-control

Show help for the Device Menu Control feature.

–help-device-osd-transfer

Show help for the Device OSD Transfer feature.

–help-dynamic-audio-lipsync

Show help for the Dynamic Audio Lipsync feature.

–help-htng

Show help for the Hospitality Profile Next Generation feature. This is an optional CEC extension for Hotel displays and is not generally available for regular displays. See http://www.htng.org for more information.

–help-osd-display

Show help for the OSD Display feature.

–help-one-touch-play

Show help for the One Touch Play feature.

–help-one-touch-record

Show help for the One Touch Record feature.

–help-power-status

Show help for the Power Status feature.

–help-remote-control-passthrough

Show help for the Remote Control Passthrough feature.

–help-routing-control

Show help for the Routing Control feature.

–help-standby

Show help for the Standby feature.

–help-system-audio-control

Show help for the System Audio Control feature.

–help-system-information

Show help for the System Information feature.

–help-timer-programming

Show help for the Timer Programming feature.

–help-tuner-control

Show help for the Tuner Control feature.

–help-vendor-specific-commands

Show help for the Vendor Specific Commands feature.

On success, it returns 0. Otherwise, it will return the error code.

This manual page is a work in progress.

Bug reports or questions about this utility should be sent to the linux-media@vger.kernel.org mailinglist.