Man1 - c44.1

c44 - DjVuPhoto encode.

c44 [*/options/*] */inputfilename/ [*/outputfilename/*]*

Produces a DjVuPhoto encoded image. The input image file inputfilename can be either a portable gray-map (

) or a portable pix-map (

). Input images compressed with

are also accepted. It is however suggested to only use high quality

files (low compression ratio, large size) because the wavelet compression will increase the defects already present in highly compressed

files.

The program produces a DjVuPhoto file outputfilename. If the output file name is not specified, a default file name will be generated by replacing the input file name suffix by suffix djvu.

The main design objective for the DjVu wavelets consisted of allowing progressive rendering and smooth scrolling of large images with limited memory requirements. Decoding functions process the compressed data and update a memory efficient representation of the wavelet coefficients. Imaging function then can quickly render an arbitrary segment of the image using the available data. Both process can be carried out in two threads of execution. This design plays an important role in the DjVu system. We investigated various state-of-the-art wavelet compression schemes. Although these schemes may achieve slightly smaller file sizes, the decoding functions did not even approach our requirements. The

wavelets reach these requirements today and may in the future implement more modern refinements if these refinements can be implemented within our constraints.

DjVuPhoto files are logically composed of a sequence of “slices” containing successive image refinements. Slices are grouped in “chunks” defining the progressive rendering sequence. The viewer is able to display an intermediate image after processing each chunk. A typical DjVuPhoto files contains 80 to 120 slices grouped into 1 to 4 chunks.

The quality selection options provide various ways to specify the number of chunks and the number of slices per chunk. The c44 program adds slices to the current chunk until exceeding a target number of slices, a target file size, or a target quality specification. The following options define targets for each chunk. The option argument contain several numerical values (one per chunk) separated by either commas or pluses.

*-slice */n/*+…+*/n/

Specify the number of slices in each chunk. The option argument contains plus-separated numerical values (one per chunk) indicating the number of slices per chunk. Option -slice 74+13+10, for instance, would be appropriate for compressing a photographic image with three progressive refinements. More quality and more refinements can be obtained with option -slice 72+11+10+10.

-slice */n/,…,*/n/

Specify the cumulative number of slices for each chunk. Since the final quality is determined by the total number of slices, it is often more convenient to use comma-separated values (one per chunk) indicating the cumulative number of slices for each chunk (i.e. including those encoded in all previous chunks). The values suggested above can also be expressed as -slice 74,87,97 and -slice 72,83,93,103.

-size */n/,…,*/n/

Specify size targets for each chunk expressed in bytes. The option argument can be either a plus-separated list specifying a size for each chunk, or a comma separated list specifying cumulative sizes for each chunk and all previous chunks. Size targets are approximates. Slices will be added to each chunk until exceeding the specified target.

-bpp */n/,…,*/n/

Specify size targets for each chunk expressed in bits-per-pixel. Both comma-separated and plus-separated specifications are accepted. Option -bpp 0.25,0.5,1 usually provides good results.

-percent */n/,…,*/n/

Specify size targets for each chunk expressed as a percentage of the input file size. Both comma-separated and plus-separated specifications are accepted. Results can be drastically different according to the format of the input image (raw or

compressed).

-decibel */n/,…,*/n/

Specify quality targets for each chunk expressed as a comma-separated list of increasing decibel values. Decibel values range from 16 (very low quality) to 48 (very high quality). This criterion should not be relied upon when re-encoding an image previously compressed by another compression scheme. Selecting this option significantly increases the compression time.

*-dbfrac */frac/

Indicate that the decibel values specified in option -decibel should be computed by averaging the mean squared errors of only the fraction frac of the most mis-represented blocks of 32 x 32 pixels. This option is useful with composite images containing solid color features (e.g. an image with a large white border).

Providing no quality specification options automatically selects a default quality specification -slice 74,89,99. Multiple quality specification options are allowed. The program outputs a file whose total number of chunks is the largest number of chunks of all quality specifications. Slices are added to each chunk until reaching any of the quality target for this chunk.

The following additional options are supported:

*-dpi */n/

Specify the resolution information encoded into the output file expressed in dots per inch. The resolution information encoded in DjVu files determine how the decoder scales the image on a particular display. Meaningful resolutions range from 25 to 1200. The default value, 100 dpi, should be suitable for most photographic images.

*-gamma */n/

Specify the gamma correction information encoded into the output file. The argument n specified the gamma value of the device for which the input image was designed. The default value is 2.2. This is appropriate for images designed for a standard computer monitor.

*-mask */pbmfilename/

The design of the

wavelets allows for compressing partially masked images. This option can be used when certain pixels of a background image are going to be covered by foreground objects like text or drawings. File pbmfile must be a

file whose size matches the size of the input file. Each black pixel in pbmfile means that the value of the corresponding pixel in the input file is irrelevant. The

encoder will replace the masked pixels by a color value whose coding cost is minimal (see http://www.djvuzone.org/djvu/techpapers/mask/index.djvu for technical details.)

*-crcbnormal *

Select normal chrominance encoding. Chrominance information is encoded at the same resolution as the luminance. This is the default.

*-crcbhalf *

Selects half resolution chrominance encoding. Chrominance information is encoded at half the luminance resolution.

*-crcbdelay */n/

This option can be used with -crcbnormal and -crcbhalf to modify the quality of the chrominance information. The option arguments specifies a parameter n, expressed in slices, that reduces the bit-rate associated with the chrominance. The default chrominance encoding delay is 10 slices.

*-crcbfull *

Select the highest possible quality for encoding the chrominance information. This is equivalent to specifying -crcbnormal and -crcbdelay 0.

*-crcbnone *

Disable the encoding of the chrominance. Only the luminance information will be encoded. The resulting image will show in shades of gray.

The default quality setting of the DjVuLibre version of c44 has been increased. It produces larger files with a better quality. Quality can be lowered using the quality selection options!

The encoder requires more memory than necessary.
The rechunking capability is currently broken.

This program was written by Léon Bottou <leonb@users.sourceforge.net> and was then improved by Andrei Erofeev <andrew_erofeev@yahoo.com>, Bill Riemers <docbill@sourceforge.net> and many others.

*djvu*(1), *pnm*(5), *cjpeg*(1).